Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Size: 607ZZ (Inner Dia.=7mm, Outer Dia.=19mm, Thickness=6mm)
BulletPoint2 : Shields on BOTH SIDES of the bearing to keep dust out. Suitable for high speed operation
BulletPoint3 : Chromium Steel long-life bearings, smooth and low noise
BulletPoint4 : ABEC Tolerance 1 (P0) Miniature Bearing for most general use
BulletPoint5 : Same As 607ZZ / 607-2Z / 80017. Pre-Lubricated, Easy to maintain
ItemName : uxcell 607ZZ Deep Groove Ball Bearing Double Shield 607-2Z 80017, 7mm x 19mm x 6mm Chrome Steel Bearings (1-Pack)
ItemPackageDimensions_Height : 13.6 centimeters
ItemPackageDimensions_Length : 1.5 centimeters
ItemPackageDimensions_Width : 9.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Steel
ModelNumber : a18041800ux0508
PartNumber : a18041800ux0508
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.


Description:

Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
With small friction and high-limit speed, Deep Groove Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance.
Single-row, pre-lubricated, normal accuracy.



Selection Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: 607ZZ
Shield Type: Double Shield
Cage Material: Stamping Steel
Inner Diameter (d): 7mm
Outer Diameter (D): 19mm
Thickness (B): 6mm
Dynamic Load Rating (Cr): 2.6kN
Static Load Rating (Cor): 1.05kN
Accuracy Class: P0 (ABEC1)
Number of Pack: 1 Pcs
Weight: 8g

ProductSiteLaunchDate : 2018-05-25T12:41:05.205Z
Size : 7mmx19mmx6mm
SupplierDeclaredDgHzRegulation : not_applicable