Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Size: 608ZZ (Inner Dia.=8mm, Outer Dia.=22mm, Thickness=7mm)
BulletPoint2 : Shields on BOTH SIDES of the bearing to keep dust out. Suitable for high speed operation
BulletPoint3 : Made from High Carbon Steel, durability and resistance to under heavy loads
BulletPoint4 : ABEC Tolerance 1 (P0) for most general use
BulletPoint5 : Pre-Lubricated, easy to maintain
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 735424862933
ExternallyAssignedProductIdentifier2 : 0735424862933
IncludedComponents : /
ItemName : uxcell 608ZZ Deep Groove Ball Bearing Double Shield 8mm x 22mm x 7mm High Carbon Steel Z1 Bearings 2pcs
ItemPackageDimensions_Height : 8.89 centimeters
ItemPackageDimensions_Length : 1.7018 centimeters
ItemPackageDimensions_Width : 6.096 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Steel
ModelNumber : a18051900ux0220
NumberOfItems : 500
PartNumber : a18051900ux0220
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.


Description:

Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
With small friction and high-limit speed, Uxcell's Deep Groove Ball Bearings are cost-effective and require little maintenance.
These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
Single-row, pre-lubricated, normal accuracy.



Selection Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: 608ZZ
Shield Type: Double Shield
Material:High Carbon Steel
Heat Treatment:Quenching
Hardness: HRC50-55
Cage Material: Stamping Steel
Inner Diameter (d): 8mm
Outer Diameter (D): 22mm
Thickness (B): 7mm
Dynamic Load Rating (Cr): 3.3kN
Static Load Rating (Cor): 1.35kN
Accuracy Class: P0 (ABEC1)
Noise Level: Z1
Package Content: 2 x Ball Bearings

ProductSiteLaunchDate : 2018-07-11T09:10:38.205Z
Size : 8mmx22mmx7mm
SpecificationMet : ABEC 1
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 500