Specification Brand : uxcell BulletPoint : Available for Domestic and International Shipping BulletPoint1 : Size: 626-2RS (Inner Dia.=6mm, Outer Dia.=19mm, Thickness=6mm) BulletPoint2 : Sealed on BOTH SIDES of the bearing to keep lubricant in. Suitable for complex environment BulletPoint3 : Made from Carbon Steel, features with good anti-rust and corrosion resistance BulletPoint4 : ABEC Tolerance 1 (P0) BulletPoint5 : Same As 626-2RS / 180026. Pre-Lubricated, Easy to maintain Color : Silver Tone ExternallyAssignedProductIdentifier : 6440891420374 ItemName : uxcell 626-2RS Ball Bearing 6mm x 19mm x 6mm Double Sealed 180026 Deep Groove Bearings, Carbon Steel (Pack of 20) ItemPackageDimensions_Height : 8.382 centimeters ItemPackageDimensions_Length : 2.286 centimeters ItemPackageDimensions_Width : 7.366 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : deep-groove-ball-bearings Manufacturer : uxcell Material : Carbon Steel ModelNumber : a18060900ux0376 NumberOfItems : 1 PartNumber : a18060900ux0376 ProductDescription : NOTE: Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.
Description:
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions. Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on. With small friction and high-limit speed, Deep Groove Ball Bearings are cost-effective and require little maintenance. Carbon Steel bearings are better in toughness than chrome steel bearings after quenching. These cost-effective bearings are widely used in areas with low requirements for hardness. Single-row, pre-lubricated, normal accuracy.
Selection Guide: Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris. Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.