Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Size: 628ZZ (Inner Dia.=8mm, Outer Dia.=24mm, Thickness=8mm)
BulletPoint2 : Shields on BOTH SIDES of the bearing to keep dust out. Suitable for high speed operation
BulletPoint3 : Made from Carbon Steel, features with good anti-rust and corrosion resistance
BulletPoint4 : ABEC Tolerance 1 (P0) for most general use
BulletPoint5 : Same As 628-2Z / 80028. Pre-Lubricated, Easy to maintain
ExternallyAssignedProductIdentifier1 : 654936898585
ExternallyAssignedProductIdentifier2 : 0654936898585
ItemName : uxcell 628ZZ Ball Bearing 8mm x 24mm x 8mm Double Shielded 628-2Z 80028 Deep Groove Bearings, Carbon Steel (Pack of 4)
ItemPackageDimensions_Height : 10.033 centimeters
ItemPackageDimensions_Length : 1.778 centimeters
ItemPackageDimensions_Width : 7.874 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Steel
ModelNumber : a18060900ux0411
PartNumber : a18060900ux0411
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.


Description:

Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
With small friction and high-limit speed, Deep Groove Ball Bearings are cost-effective and require little maintenance.
Carbon Steel bearings are better in toughness than chrome steel bearings after quenching. These cost-effective bearings are widely used in areas with low requirements for hardness.
Single-row, pre-lubricated, normal accuracy.



Selection Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: 628ZZ
Shield Type: Double Shield
Material: Carbon Steel
Cage Material: Stamping Steel
Inner Diameter (d): 8mm
Outer Diameter (D): 24mm
Thickness (B): 8mm
Dynamic Load Rating (Cr): 3.35kN
Static Load Rating (Cor): 1.4kN
Accuracy Class: P0 (ABEC-1)
Number of Pack: 4 Pcs
Weight: 65g

ProductSiteLaunchDate : 2018-08-01T16:22:56.250Z
Size : 8mmx24mmx8mm
SpecificationMet : ABEC 5
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31171500