Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : 6704ZZ (I.D.=20mm, O.D.=27mm, Thickness=4mm)
BulletPoint2 : 6704zz bearings are shielded on BOTH SIDES to keep lubricant in
BulletPoint3 : Chromium Steel long-life bearings, smooth and low noise
BulletPoint4 : ABEC Tolerance 1 (P0), Z17 Noise Level for most general use
BulletPoint5 : Static load rating of 1,980 newtons and dynamic load rating of 4,580 newtons
ItemName : uxcell 6704ZZ Deep Groove Ball Bearing 20x27x4mm Double Shielded Chrome Steel Bearings 5-Pack
ItemPackageDimensions_Height : 14.1986 centimeters
ItemPackageDimensions_Length : 1.4986 centimeters
ItemPackageDimensions_Width : 10.1092 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Steel
ModelNumber : a18120800ux0112
PartNumber : a18120800ux0112
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.


Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.



Selection Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: 6704ZZ
Shield Type: Double Shielded
Inner Race/Outer Race Meterial: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 20mm
Outer Diameter (D): 27mm
Thickness (B): 4mm
Dynamic Load Rating (Cr): 1.04kN
Static Load Rating (Cor): 0.725kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 5 Pcs

ProductSiteLaunchDate : 2019-01-10T10:07:58.082Z
Size : 20x27x4mm
SpecificationMet : Abec Tolerance 1 (P0)
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26111500