Specification Brand : uxcell BulletPoint1 : F608-2RS (I.D.=8mm, O.D.=22mm, Thickness=7mm, Flange Dia.: 25mm) BulletPoint2 : f608rs bearings are sealed on BOTH SIDES to keep lubricant in BulletPoint3 : Chromium Steel long-life bearings, smooth and low noise BulletPoint4 : ABEC Tolerance 1 (P0), Z1 Noise Level for most general use BulletPoint5 : Static load rating of 1379 newtons and dynamic load rating of 3293 newtons Color : Silver Tone ExternallyAssignedProductIdentifier : 8865590452668 ExternallyAssignedProductIdentifier1 : 841339064567 ExternallyAssignedProductIdentifier2 : 0841339064567 GpsrSafetyAttestation : 1 ItemDisplayDimensions_Length : 0.5 inches ItemDisplayWeight : 21 grams ItemName : uxcell F608-2RS Flange Ball Bearing 8x22x7mm Sealed Chrome Bearings 2pcs ItemPackageDimensions_Height : 14.605 centimeters ItemPackageDimensions_Length : 1.524 centimeters ItemPackageDimensions_Width : 9.906 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : deep-groove-ball-bearings Manufacturer : uxcell Material : Chrome Steel (GCr15) ModelNumber : a19070900ux0775 NumberOfItems : 1 PartNumber : a19070900ux0775 ProductDescription : NOTE: Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product. Description: -Single-row, pre-lubricated, normal accuracy. -Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions. -With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance. -Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance. -Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
Selection Guide: Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris. Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.