Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : MR83ZZ (I.D.=3mm, O.D.=8mm, Thickness=3mm)
BulletPoint2 : mr83z bearings are shielded on BOTH SIDES to keep lubricant in
BulletPoint3 : Chromium Steel long-life bearings, smooth and low noise
BulletPoint4 : ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
BulletPoint5 : Static load rating of 130 newtons and dynamic load rating of 274 newtons
ExternallyAssignedProductIdentifier1 : 841339014210
ExternallyAssignedProductIdentifier2 : 0841339014210
ItemDisplayDimensions_Length : 15 millimeters
ItemDisplayWeight : 46 grams
ItemName : uxcell MR83ZZ Ball Bearing 3x8x3mm Double Shielded Mini Deep Groove Bearings 5pcs
ItemPackageDimensions_Height : 15.24 centimeters
ItemPackageDimensions_Length : 0.0762 centimeters
ItemPackageDimensions_Width : 10.16 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Alloy Steel
ModelNumber : a19070900ux0733
NumberOfItems : 1
PartNumber : a19070900ux0733
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:
-Single-row, pre-lubricated, normal accuracy.
-Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
-With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
-Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance.
-Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.

Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: MR83ZZ
Shield Type: Double Shielded
Inner Race/Outer Race Meterial: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 3mm
Outer Diameter (D): 8mm
Thickness (B): 3mm
Dynamic Load Rating (Cr): 0.274kN
Static Load Rating (Cor): 0.13kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 5 Pcs

ProductSiteLaunchDate : 2019-09-17T03:30:32.285Z
Size : 3mmx8mmx3mm
SpecificationMet : ABEC 1
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 4
UnspscCode : 26111500