Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : MR93ZZ (I.D.=3mm, O.D.=9mm, Thickness=4mm)
BulletPoint2 : mr93zz bearings are Shielded on BOTH SIDES to keep lubricant in
BulletPoint3 : Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Static load rating of 151 newtons and dynamic load rating of 485 newtons
ExternallyAssignedProductIdentifier : 6440891423917
ExternallyAssignedProductIdentifier1 : 0769173983205
ExternallyAssignedProductIdentifier2 : 769173983205
ItemName : uxcell MR93ZZ Deep Groove Ball Bearings 3mm Inner Dia 9mm OD 4mm Bore Double Shielded Chrome Steel Z2 5pcs
ItemPackageDimensions_Height : 13.8 centimeters
ItemPackageDimensions_Length : 1.2 centimeters
ItemPackageDimensions_Width : 9.8 centimeters
ItemPackageQuantity : 5
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Steel
ModelNumber : a19092000ux1281
NumberOfItems : 5
PartNumber : a19092000ux1281
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
These cost-effective bearings are widely used in areas with low requirements for hardness.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.


Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:
Model: MR93ZZ
Seal Type: Double Shielded
Inner Race/Outer Race Material: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 3mm
Outer Diameter (D): 9mm
Thickness (B): 4mm
Dynamic Load Rating (Cr): 485N
Static Load Rating (Cor): 151N
Accuracy Class: P0 (ABEC-1)
Noise Level: Z2
Number of Pack: 5 Pcs

ProductSiteLaunchDate : 2019-12-13T08:00:35.808Z
Size : 3x9x4mm
SpecificationMet : ABEC 1
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 49131606