Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : [Size] - SF688ZZ bearing (I.D.=8mm, O.D.=16mm, Thickness=5mm, Flange Dia=18mm).
BulletPoint2 : [Magnetic] - 440 Stainless Steel provides higher resistance to rust and corrosion than chrome steel, and it is magnetic.
BulletPoint3 : [Easy to Maintain] - Shields on Both sides to keep lubricant in. P0 grade (ABEC-1) for most general use.
BulletPoint4 : [Load & Speed] - Dynamic load rating of 1.252kN and static load rating of 0.592kN. With small friction and high-limit speed.
BulletPoint5 : [Application] - Commonly used for glider/rocker arm, wheel of the cart, lawnmower, printers, fax machines, power tools, and other projects.
ItemName : uxcell SF688ZZ Flanged Ball Bearing 8x16x5mm Double Shielded Stainless Steel Bearings 4pcs
ItemPackageDimensions_Height : 13.6 centimeters
ItemPackageDimensions_Length : 0.8 centimeters
ItemPackageDimensions_Width : 10.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Stainless Steel
ModelNumber : SF688ZZ
PartNumber : a21032000ux0058
ProductDescription : Note
Please refer to the picture and select the right type of bearings before your order (Sealed or Shield on Both or Single side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Selection Guide
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

DescriptionSingle-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial loads.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Stainless steel bearing features stronger rust and corrosion resistance ability.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment, and so on
Specification

Shield Type: Double Shielded
Inner Race/Outer Race Material: 440C Stainless Steel
Cage Material: Stamping Steel
Inner Diameter (d): 8mm
Outer Diameter (D): 16mm
Thickness (B): 5mm
Flange Dia.: 18mm
Flange Thickness: 1.1mm
Dynamic Load Rating (Cr): 1.252 kN
Static Load Rating (Cor): 0.592 kN
Accuracy Class: P0 (ABEC1)



ProductSiteLaunchDate : 2021-08-17T11:11:31.036Z
Size : 8x16x5mm
SpecificationMet : ABEC 1
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31171500