Specification AgeRangeDescription : Adult (18 and up) Brand : Pokin BulletPoint1 : 【COMPATIBLE WITH】Hanging kit compatible with AprilAire Dehumidifiers E070,E080,E100,E130,1820,1830,1850,1852,1870,1872,the hanging kit enjoys a variety of mounting options. BulletPoint2 : 【OPYIMIZE SPACE】Maximize space utilization with hanging kits, ideal for areas prone to flooding or with limited floor space, these kits provide a flexible space management solution that is essential for homes with limited floor space. BulletPoint3 : 【ENHANCED PERFORMANCE】Correctly installed hanging kit minimize noise and vibration transmission, which improves comfort and allows you to experience a quieter environment; providing additional height facilitates efficient condensate drainage and optimizes dehumidification performance. BulletPoint4 : 【Hanging Kit Components】Upgrade your dehumidification setup with the Heavy Duty hanging Kit, which includes a one-piece bracket*4, eye bolts*4, and ratchet ropes (7 ft.)*4. The ropes are made of braided polypropylene, which provides superior toughness and durability. The kit comes with galvanized stainless steel hooks for greater reliability. BulletPoint5 : 【EASY TO INSTALL 】Attach brackets to the dehumidifier, screw eye bolts into floor joists, and clip the carabiners to the ratchet to the eye bolts and to the brackets.You can effortlessly customize the height to easily hang your dehumidifier in a crawl space, basement or attic. Capacity : 0.5 pounds Color : Black CustomerPackageType : Manufacturer's Standard Packaging DehumidificationCapacity : 8 liters_per_day ExternallyAssignedProductIdentifier1 : 0768825288286 ExternallyAssignedProductIdentifier2 : 768825288286 FloorArea : 90 Hazmat : 9 IncludedComponents : Dehumidifier ItemDisplayWeight : 0.48 pounds ItemName : Pokin 5822 Dehumidifier Hanging Kit Replacement for AprilAire E070 E080 E100 E130 1820 1830 1850 1852 1870 1872 Whole House Dehumidifier - Full Complete Kit - Crawl Spaces, Basements ItemPackageDimensions_Height : 17.399 centimeters ItemPackageDimensions_Length : 5.9944 centimeters ItemPackageDimensions_Width : 13.4874 centimeters ItemPackageQuantity : 1 ItemShape : Rectangular ItemTypeKeyword : dehumidifier-accessories Manufacturer : Pokin Material : Aluminum, Polyurethane Foam MetalType : Aluminum ModelName : 5822 dehumidifier hanging kit ModelNumber : AP5822 NumberOfBoxes : 1 NumberOfItems : 1 PackageLevel : unit PartNumber : AP5822 ProductDescription : 5822 Dehumidifier Hanging Kit Installation Instructions Compatible with AprilAire
The brackets are designed to attach to the dehumidifier using the leveling feet. 1. Tip the dehumidifier enough to remove one foot. 2. Slide the foot through the large hole in the bracket. 3. Screw the foot back into the base of the dehumidifier. Fully tighten foot. 4. Repeat with remaining feet.
INSTALLING EYE BOLTS:
Eye bolts should be screwed into floor joists horizontally. 1. Measure the distance between the centers of the clip mounting holes in bracket, along the length of the dehumidifier. 2. Use that dimension to determine eye bolt spacing. Eye bolts should be installed horizontally. 3. Use a drill and 13/64" (max) drill bit to drill pilot holes. 4. Use a screw driver to turn in eye bolts until no threads are visible. INSTALLING RATCHET ROPES:
1. Clip the carabiners connected to the ratchet to the eye bolts. 2. Use the release lever to lengthen the rope to the hanging bracket. 3. Clip the carabiners on the knotted end of the rope to the hanging brackets. 4. Pull down on the free end to take out any slack in the hanging rope. 5. To raise unit, simultaneously pull up on the rope attached to the brackets or support the weight of the corner being adjusted, and pull down on the free end of rope. 6. Make 6" or less vertical adjustments on each rope until unit is at desired height. 7. Use a level to make sure unit is level in both front to back and side to side directions. CAUTION:
1. Hanging kit is designed for attic and crawl space residential use only. 2. Not intended for overhead use in an occupied space.
TOOLS REQUIRED: Tape measure Level Screw driver Drill with 13/64"