Cart 2 india

Specification
AutoPartPosition : outside
Brand : Dent Fix
BulletPoint1 : Leading Manufacturer Of High-Quality Products
BulletPoint2 : International Renown For Our Diverse Range Of Award-Winning Products
BulletPoint3 : Fully Equipped With State-Of-The-Art Technology
BulletPoint4 : All Products Have Been Designed With The Professional In Mind
BulletPoint5 : Constantly Modernizing Our Powerful Devices To Meet The Demands Of The Modern User
Color : Factory
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 8710783900887
ExternallyAssignedProductIdentifier1 : 811662030355
ExternallyAssignedProductIdentifier2 : 0811662030355
FinishType : Titanium
FitType : Universal
GpsrSafetyAttestation : 1
IncludedComponents : Dent Fix - 10Mm Titanium Carbonitrate Bit (DF1610TC)
ItemName : Dent Fix - 10Mm Titanium Carbonitrate Bit (DF1610TC)
ItemPackageDimensions_Height : 0.2 inches
ItemPackageDimensions_Length : 2 inches
ItemPackageDimensions_Width : 0.2 inches
ItemPackageQuantity : 1
ItemTypeKeyword : dent-removal-tools
Manufacturer : Dent Fix
Material : Resin
ModelNumber : DF1610TC
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : DF1610TC
ProductDescription : Specifications:
Stick size: 7mm x 200mm /0.28" x 7.87"(Diameter*Length)
Softening Point: 100°C
Total Length：200mm/7.87"

Description:
Advanced, practical ,stability and strong viscosity design of this glue adhesive stick.
This practical glue stick use in high temperature glue gun(not included).
Great for car paintless dent repair and more.

How to Use?
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.

Package Included:
20 x Hot Melt Glue Sticks(10 Clear & 10 Yellow)


ProductSiteLaunchDate : 2020-01-03T08:00:00.000Z
Size : One Size
SkipOffer : 1
Style : German
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111701