Cart 2 india

Specification
Brand : MOETER
BulletPoint1 : Great Accuracy: Vertical: Measurement±1 mm (±0.04") tick marks on X-Y axes; ±0.5 mm (±0.02") discrimination Horizontal Measurement:±20 mm (±0.79") horizontal and ±10 mm (±0.38") vertical range
BulletPoint2 : Crack Monitors: The Standard Crack Monitors displacement will be shown by a movement of the cross hairs over the measuring scale (40 x 20 mm). The standard model for monitoring displacements in two directions (top-bottom/left-right).
BulletPoint3 : Updated Pre-set Pegs : Updated added two fixed adapters, so you can fix it with zero with one hand. You can use our Corner Crack Monitor to monitor the horizontal or vertical movement of cracks on a plane. It is a precision instrument.
BulletPoint4 : The Crack Monitors is fixed across the crack using screws and plugs and/or adhesive Fix the Crack Monitors over the crack with the vertical 0 lines on the calibration scale parallel with the crack to be monitored. Ensure the plate with the engraved right-hand side of the crack. Remove the two pre-set pegs. If the crack opens or closes the cursor moves relative to the calibration scale. The opening or closing of the crack can then be recorded on the record sheet.
BulletPoint5 : Better Material: Made of high-quality acrylic material, Crack Gauge Monitor is durable, sturdy, smooth, wear-resistant, and not easy to break. Crack Monitor is designed with a highly clear acrylic sheet and an easy-to-read measurement grid, which makes it clear and precise.
ExternallyAssignedProductIdentifier : 7046703757066
ExternallyAssignedProductIdentifier1 : 0765128161599
ExternallyAssignedProductIdentifier2 : 765128161599
IncludedComponents : Two Pre-Set Pegs 1PC Crack Monitors
ItemName : Crack Gauge Tell-Tale Monitor，Crack Monitor with Updated two pre-set pegs|Crack Measure and Record Instrument for Monitoring Wall Deformation and Crack
ItemPackageDimensions_Height : 19.7104 centimeters
ItemPackageDimensions_Length : 1.8034 centimeters
ItemPackageDimensions_Width : 10.3124 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : depth-gauges
Manufacturer : MOETER
ModelName : MET-CR-03
ModelNumber : MET-CR-03
NumberOfBoxes : 1
PartNumber : MET-CR-03
PowerSourceType : hand_powered
ProductDescription : The Crack monitors is fixed across the crack using screws and plugs and/or adhesive Fix the Tell-Tale over the crack with the vertical 0 lines on the calibration scale parallel with the crack to be monitored. Ensure the plate with the engraved right-hand side of the crack. Remove the two pre-set pegs. If the crack opens or closes the cursor moves relative to the calibration scale. The opening or closing of the crack can then be recorded on the record sheet.
ProductSiteLaunchDate : 2023-01-05T07:37:07.458Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27110000