Cart 2 india

Specification
Brand : Jyving
BulletPoint1 : Suction capacity: 32cm-Hg
BulletPoint2 : Material: Anti-static P.P
BulletPoint3 : Whole Length: 195mm
BulletPoint4 : Function: Be used for repairing appliance, for collecting the solder when disassembling pads melting electronic component
BulletPoint5 : Quantity: 1pc
Color : Gold
ExternallyAssignedProductIdentifier : 9828696821188
ExternallyAssignedProductIdentifier1 : 0685330031858
ExternallyAssignedProductIdentifier2 : 685330031858
HeatingElementType : Ceramic
ItemName : 908-366A Strong Anti-Static Suction Tin Device Anti-Static Desoldering Pump Aluminum Alloy Solder Single Hand Sucker Pen Tools
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 19 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : desoldering-pumps
Manufacturer : Jyving
Material : copper
ModelName : Bognajiniyedsk5ft9
ModelNumber : Fydunn5kx2z071y
NumberOfItems : 1
PartNumber : JY-3256802407640123
ProductDescription : Specifications:
Name: Strong anti-static Suction tin device
Suction capacity: 32cm-Hg
Material: Anti-static P.P
Whole Length: 195mm
Function: Be used for repairing appliance, for collecting the solder when disassembling pads melting electronic component

Operation Manual:
1. Put the tin suctioner piston downward pressure to get stuck.
2. Heating solder joints to solder melting with electric soldering iron.
3. Remove the iron and quickly put the tin suctioner resistance paste solder, solder sucker and press the button.
4. If It is not clean at one time and can be repeated many times.

Using skills:
1. To ensure good solder sucker piston seal. Before electricity, with your fingers to plug hole solder sucker head, solder sucker head to press the button, if the piston is not easy to pop into place, that the seal is good.
2. The aperture tin suctioner heads are of different sizes, select the appropriate specifications.
3. Tin suctioner head wears, should replace the new one.
4. Solder paste is dipped in a little bit of rosin before contact with solder to improve solder fluidity.
5. Head contact pads are slightly longer, when solder melts, the solder joint pin as the center, then hand out in a clockwise direction to draw a circle, and then press the button tin suctioner.

ProductSiteLaunchDate : 2023-04-24T08:55:18.706Z
Size : Length: 195mm
Style : Gun
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 23271800