Cart 2 india

Specification
Brand : Hakko
BulletPoint : Chip Quik Removal Alloy
BulletPoint1 : Length: 6.6 ft (2
BulletPoint2 : Wire width: 0.08 in (2
BulletPoint3 : Type: No Clean
BulletPoint4 : Flux: Halogen free
BulletPoint5 : Case: ESDSAFE
Color : blue
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 4962615057267
ExternallyAssignedProductIdentifier1 : 632296853406
ExternallyAssignedProductIdentifier2 : 0632296853406
ExternallyAssignedProductIdentifier3 : 00779008424001
ExternallyAssignedProductIdentifier4 : 5915903613552
ExternallyAssignedProductIdentifier5 : 5899406100989
ExternallyAssignedProductIdentifier6 : 0700736616512
FitType : Fitted
GpsrSafetyAttestation : 1
IncludedComponents : No
ItemDisplayWeight : 0.5 pounds
ItemName : Hakko FR150-87 Soldering Suction Wire, Wick, Unclean, 0.08 inches (2 mm) x 6.6 ft (2 m), Bag Included
ItemPackageDimensions_Height : 12 centimeters
ItemPackageDimensions_Length : 0.6 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : desoldering-wicks
Manufacturer : 白光(HAKKO)
Material : Copper
ModelName : 453
ModelNumber : FR150-87
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
NumberOfWires : 1
PackageLevel : unit
PartNumber : FR150-87
ProductDescription :

Desoldering Wick Suitable for precision instruments

Solder wick fast heat conduction, fast tin absorption, not only improve work efficiency, but also suitable for various electronic PCB circuit boards

Desoldering braid weaving process, soft design

The pure copper material has a significant effect of attracting tin, and a small amount of tin suction tape can be used to remove more solder

The solder wick is used when soldering IC and other components, the tin on the pins can be sucked away to ensure that there is no short circuit between the pins. When the BGA components are planted, use the solder wick Cleaning the pads of BGA components greatly increases the success rate of ball planting.

It is very convenient to remove solder, just three steps, easy to use:

Step 1: Put an appropriate length of the suction wick on the cleaned soldering point, and then use the electric iron nozzle to lightly heat it, and the solder will be sucked by the suction wick after the solder has melted.

Step 2: After solder wick is absorbed, please remove Soldering Iron Tip and the wick at the same time.

Step 3: Please cut off the used wick with cutting pliers.

Warm reminder: In order to prevent burns, please do not directly touch the solder wick during use, you should take the shell or use tweezers and other tools to grasp it.

ProductSiteLaunchDate : 2022-11-03T22:23:26.666Z
SafetyDataSheetUrl : https://www.mgchemicals.com/downloads/msds/01%20English%20Can-USA%20SDS/sds-400.pdf
Size : 線幅:2mm
Strands : シングルストランド
Style : W 0.078'' L 9.84'
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 23271800