Cart 2 india

Specification
Brand : TOPINCN
BulletPoint1 : 【Fast and safe 】:Professional Selector II will indicate genuine or fake.It is designed for quick, precise, and safe testing.LCD display & LED indicator.Uses large / small switches for testing diamonds,Emits audible sounds to easily differentiate the readings.
BulletPoint2 : 【Bare Hands Operation】:All the tests must be done by your bare hands. If you put on your gloves, the metal alert will not function since a normal levelof your hands is necessary for operation.All test must be done by TWO hands, one for hold the and one for the tester. As for the hand which hold tester, you have to touch the electricity conductive panel on the back of the unit.If you test the just by one hand, you will get a wrong result.
BulletPoint3 : 【Beeping Upon Startup】:Ensure correct installation and adequate power in the test pen battery. Also, clean the test pen probe as maintaining its cleanliness can enhance testing efficacy.A beeping sound upon powering on signifies the need for initialization settings. Consult the table on the rear of the machine for the specific initialization settings considering the diamond's temperature and size. Adjust the initial number of illuminated lights by rotating the knob (the default setting is to
BulletPoint4 : 【High-Frequency Sound when Testing Metal】:The high-frequency sound during metal testing is due to the test pen's operational principle, which relies on thermal conductivity to distinguish between diamonds and fake gemstones. Since metal possesses thermal conductivity similar to diamonds, it generates a high-frequency sound during testing.
BulletPoint5 : 【Simple to Use】:Diamond Tester Pen is simple to operate to get results, professional(s) are not required. Simply turn on our Tester Pen detector; place the tip of the Tester on the gem stone (lightly pressed is sufficient) and If the stone is fake, crystal or cubic zirconia, the tester will not beep.
BulletPoint6 : [Touch Panel]: We have to touch the panel on the back when testing. Othersize we will get a wrong result.
BulletPoint7 : [Incorrect Contact]: When we have incorrect contact, this diamond tester pen will have a flashing OR it will turn off. When you testing metal,skin,or something else.
BulletPoint8 : [Warm Notice]:Make sure to test according to the correct testing procedure, avoid using the diamond tester on unsuitable items(metal,skin,water and ect.), to ensure accurate testing results. Any improper operation may affect the accuracy of the test.
BulletPoint9 : [Package include]:1 x Diamond Tester Pen, 1X 60XJewelers Loupe,1x 1M USB Cabel,1 x Testing Platform,1 x User Manual
Color : BLACK
ExternallyAssignedProductIdentifier : 7679125585308
ExternallyAssignedProductIdentifier1 : 0112070300017
ExternallyAssignedProductIdentifier2 : 112070300017
GpsrSafetyAttestation : 1
IncludedComponents : inc
ItemName : Tester Pen Jeweler Tool, Gem Tester, Tester for Novice and Expert, High Accuracy Professional Selector II Testing Tool Practical and Effective for Gem Testing
ItemPackageDimensions_Height : 19 centimeters
ItemPackageDimensions_Length : 4 centimeters
ItemPackageDimensions_Width : 14.5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : jewelry-diamond-testers
LowerTemperatureRating : 10 degrees_celsius
Manufacturer : TOPINCN
Material : Plastic
MaximumOperatingVoltage : 9 volts
MeasurementAccuracy : 2%
MinimumOperatingVoltage : 5 volts
ModelName : 1
ModelNumber : TOPINCNmtzonrqa0k1794
NumberOfItems : 1
OperationMode : Automatic
PartNumber : TOPINCNmtzonrqa0k1794
PowerSourceType : Battery Powered
ProductDescription : Features:
1. Lightweight and compact in size, easy and convenient to carry.
2. Selector II can help you to distinguish whether your is real or fake.
3. Selector II is equipped with a PU bag and small testing tray for holding loose stones.
4. Green indicator will be showed on Selector II if the stone is a real . It will make continuous buzzing sound when user accidentally touches metal rather than stone.
5. Moissanite Tester is a matching instrument with the Selector II. It is only used for the distinction of colorless Moissanite.
6. Non-destructive testing, simple and accurate operation, low power consumption, low battery alarm (red light indication) for Moissanite Tester.
7. After 10 minutes' use of Moissanite Tester, the power indicator light (green light is automatically turned off) and long beep sounds will alert the user to turn off the instrument.

Specification:
Condition: Brand New
Item Type: Jewelry Tool
Material: Plastic
Color: As Shown in the Picture
Selector II Size: Approx. 16 * 4 * 2.1cm / 6.30 * 1.57 * 0.83inch
Selector II Battery: 9V (Not Included)
Moissanite Tester Size: Approx. 2.2 * 4 * 16cm / 0.87 * 1.57 * 6.30inch
Moissanite Tester Battery: 9V (Not Included)
Weight: Approx. 325g

Package List:
1 * Selector II
1 * Moissanite Tester
2 * Manuals
2 * Trays

Note for Moissanite Tester:
1. The probe of this instrument is very sensitive. It should wear the PU bag to be protected when not in use.
2. Low power battery should be replaced in real time to ensure accurate detection
3. Take out the battery if it will not be used for a long time.
4. For correct testing, it is recommended that you take a calibration adjustment after annual maintenance.

ProductSiteLaunchDate : 2021-10-05T00:37:12.372Z
Size : default
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 53120000
UpperTemperatureRating : 50 degrees_celsius
WarrantyDescription : 1 year manufacturer