Cart 2 india

Specification
Brand : Aqur2020
BulletPoint1 : Zinc Alloy: The body of this Pneumatic Grinder is made of high quality zinc alloy materials, lightweight, low vibration design, reduce hand fatigue.
BulletPoint2 : Small Volume The pneumatic grinder is small in size, high in power, and low in speed, making it more suitable for working in a small space.
BulletPoint3 : Carry out a trial run for at least 30 seconds under no load, and use it after confirming that there is no abnormality. During operation, the gas pipe must be placed at the back end to prevent accidents. Hold the machine with both hands during work and ensure a stable footing.
BulletPoint4 : Sealed bearing design keeps out contaminants promoting
BulletPoint5 : Body adopts zinc alloy, lightweight, lowvibration design, reduce hand fatigue.
ItemName : Mini Compact Air Pneumatic Die Grinder Low Speed Engraving Machine Grinding Tool Power Die Grinders
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 26 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemTypeKeyword : power-die-grinders
Manufacturer : Aqur2020
ModelName : Aqur2020pnz3aod8b1
ModelNumber : Aqur2020pnz3aod8b1
PartNumber : Aqur2020pnz3aod8b1
ProductDescription : 1. Small size, high power, low speed, suitable for working in small spaces.
2. High‑quality gear and bearing structure extend the life of abrasive tools.
3. Sealed bearing design keeps out contaminants promoting operation.
4. Body adopts zinc alloy, lightweight, low‑vibration design, reduce hand fatigue.
5. Small size collet designs, can achieve tight or angular grinding operations.

Spec:
Item Type: Pneumatic Grinder
Material: Zinc Alloy
Color: As shown in the picture
Weight: Approx.960g/33.9oz
Product Speed: 2500-3500rpm
Product Chuck Size: Approx.3mm / 0.12in, 6mm / 0.24in
Air Inlet: 1/4
Air Consumption: 0.2m³/min
Use Air Pressure: 90PSI
Application: Home decoration, handicraft polishing, rough trimming, etc.
How to Use
1. Carry out a trial run for at least 30 seconds under no load, and use it after confirming that there is no abnormality.
2. During operation, the gas pipe must be placed at the back end to prevent accidents.
3. Hold the machine with both hands during work and ensure a stable footing.
4. If the gas stops suddenly during work, the switch must be set to the off state immediately.
5. During the grinding and polishing process, apply even force, and it is strictly forbidden to apply too much force or hit the object.

PackageList:
1 x Pneumatic Grinder
2 x Wrench
1 x Air Connection
1 x Chuck
1 x Instruction Manual

Notice:
Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.


ProductSiteLaunchDate : 2023-08-11T12:05:27.357Z
Style : Pencil
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 27112700