Home / Industrial & Scientific / Differential

MAX492ESA+ - Operational Amplifier, Rail to Rail I/O, 2 Amplifier, 500 kHz, 0.2 V/?s (Pack of 5) (MAX492ESA+)

MAX492ESA+ - Operational Amplifier, Rail to Rail I/O, 2 Amplifier, 500 kHz, 0.2 V/?s (Pack of 5) (MAX492ESA+)

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 15400/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Proceed to Pay

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : Juried Engineering
BulletPoint1 : The LM324 consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply or split supply over a wide range of voltages.
BulletPoint2 : Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA Typical, Wide Supply Ranges: Single Supply: 3 V to 32 V Dual Supplies: ±1.5 V to ±16 V
BulletPoint3 : Low Input Bias and Offset Parameters - Input Offset Voltage: 3 mV Typical - Input Offset Current: 2 nA Typical - Input Bias Current: 20 nA Typical
BulletPoint4 : Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing Near Ground
BulletPoint5 : Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: 32 V
ExternallyAssignedProductIdentifier : 5603098235153
ExternallyAssignedProductIdentifier1 : 0719417816028
ExternallyAssignedProductIdentifier2 : 719417816028
IncludedComponents : Juried Engineering ESD Safe Packaging (Pack of 20)
ItemName : MAX492ESA+ - Operational Amplifier, Rail to Rail I/O, 2 Amplifier, 500 kHz, 0.2 V/?s (Pack of 5) (MAX492ESA+)
ItemPackageQuantity : 1
ItemTypeKeyword : differential-amplifiers
Manufacturer : MAXIM INTEGRATED PRODUCTS
Material : PDIP
Material1 : epoxy
Material2 : lead
Material3 : Metal
Material4 : silicon
ModelNumber : LM324N
MountingType : Surface Mount
NumberOfItems : 1
PartNumber : LM324N
ProductDescription : The LM324 consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply or split supply over a wide range of voltages.

The input stage uses a Darlington PNP configuration with dedicated internal current sources on all of the transistor emitters.

The op amp can provide a low output voltage near the negative rail, provided that the load and load termination voltage are aiding the Constant-Current-Sink driver.
ProductSiteLaunchDate : 2024-08-15T13:37:42.681Z
Size : 1
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
UnspscCode : 32101600

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.