Cart 2 india

Specification
Brand : NJBVRS
BulletPoint1 : Enhanced Visibility: The 7-bit LCD display is specifically designed for long travel equipment, providing clear and easy-to-read measurements even in challenging conditions
BulletPoint2 : High Contrast Backlight: With a vibrant backlight, the display remains clear and eye-catching, ensuring you can easily view data at a glance, regardless of lighting
BulletPoint3 : Energy Efficient Design: Featuring low power consumption, this device operates on two built-in 5V batteries, eliminating the need for an external power supply for ultimate convenience
BulletPoint4 : Exceptional Repeat Accuracy: Achieve reliable results with a repeat accuracy of ±0.01 mm, making it for precision tasks that demand consistency
BulletPoint5 : Versatile Functionality: Easily switch between metric and units, and choose between linear or angle measurements to suit your specific project needs
Color : 1m Set
ExternallyAssignedProductIdentifier : 7504366696714
ItemName : Digital Linear Scale Accurate 7-Bit LCD Display LP02 Digital Magnetic Scales/Sensor Set/Kit for Milling Grinding Stone Wood Cutting Machines for Milling Machines Lathes,Mounting Accessories(1M Set)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : digital-calipers
Manufacturer : NJBVRS
ModelName : NJBVRS
ModelNumber : NJBVRS
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : NJBVRS
ProductDescription : 7-bit LCD display, more suitable for long travel equipment
High contrast backlight, clear and eye-catching
Low power consumption, no external power supply (built-in two 5 batteries)
Repeat accuracy ±0.01 mm
Initial value reset function (" clear ")
Optional mm/ inches inch mm
Optional linear/angle measurements
Points for attention
1. this product is installed, if the deviation is too large, it will affect the accuracy of use, or even can not be used
2. please do not corrode, acid and alkali, direct sunlight and other occasions that exceed the environmental requirements,
otherwise it may cause trouble
The bending radius of the 3. head conductor must be greater than 25 mm
4. the installation of this equipment should be far away from circuit breakers, relays, motor capacitors, brakes, clutches,
frequency converters and so on at least 0.5 meters above
5. cable direction must be separated from the power line to reduce incoming noise
Preparation:
1. move direction confirm: read head move data is increasing otherwise enter P02 reset.
2. compensation starting point confirmation: move the read head to the machine origin while pressing the ""+"" key to
display "--00--" and the operation is successful.
Operation process:
1,To enter the menu P27, select 1, press "F to enter the starting point 0 for multi-segment compensation;
2,After entering the current true length value, press "Save F" and move to the next compensation point.
3,Repeat the previous step until finish 5 and exit automatically.
(Note: If you do not need full compensation in 5 paragraphs, press to force the current point compensation to be completed and withdrawn)
ProductSiteLaunchDate : 2025-04-11T06:49:27.210Z
Size : 1
UnitCount : 1
UnspscCode : 41111600