Cart 2 india

Specification
AgeRangeDescription : Adult
Brand : Generic
BulletPoint1 : [K Type Thermocouple] The thermometer uses K type thermocouple temperature sensor as the sensor.
BulletPoint2 : [ Accuracy] Adopts single chip microcomputer software control, with accuracy and no temperature drift.
BulletPoint3 : [Self Calibration Compensation] Has the function of self calibration compensation, automatic transmission display of large value and small value test function.
BulletPoint4 : [Low Voltage Display] The thermometer has a low voltage display and automatic shutdown, and the measurement power consumption is 0.5mA.
BulletPoint5 : Design] The design is reasonable, which is convenient for temperature measurement in any situation.
BulletPoint6 : Automatic detection of broken couple
BulletPoint7 : Specified channel scan
BulletPoint8 : Standard data acquisition software
Color : white
IncludedComponents : No
ItemLength : 3.93 inches
ItemName : Digital Thermometer K Type Single Channel Tester for Industrial Temperature Measurement
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 18 centimeters
ItemPackageDimensions_Width : 12 centimeters
ItemTypeKeyword : science-lab-digital-thermometers
Manufacturer : Generic
MeasurementAccuracy : 0.1mm
ModelName : TIKATARERbhg80srng1
ModelNumber : Generic17k3ivdhgo
NumberOfItems : 1
PartNumber : Generic17k3ivdhgo
ProductDescription : Specification:
Item Type: Digital Thermometer
Material: ABS, Silicone
Model: For DT1311
Battery: 1.5V 4 x AAA (Not Included)
Purpose: Industrial Temperature Test and Measurement
Basic Parameters:
Display LCD Widescreen: Maximum Display 999.9
Measuring Range: -200℃ to 1370℃, -328℉ to 2498℉, 73K to 1643K
Resolution: 0.1℃/0.1℉, 1°/1℉, 0.1K/1K
Accuracy: ± (1% reading + 1℃), ± (1% reading + 2℉), ± (1% reading + 2K).
Working environment: 0 to 50°C (14 to 122°F)
Humidity:

How to Use:
Instructions for use
(1) Open the package, take out the instrument package, install the battery, battery cover and shockproof protective clothing
(2) Press the (1) red button, the power supply (it is normal for a short stay at this time) to insert the probe marked with positive and negative poles into the input port, and warm up
10 minutes. For the convenience of users, the instrument is equipped with three temperature mode selections. Users can switch between ℃/℉/K as needed, and the temperature measurement range can be automatically switched.
(3) Put the probe on the measuring place, the reading is the temperature of the object on the display, after the meter reading is stable
(4) To keep the measured data, press the HOLD key and the HOLD sign will appear on the display, the display will not change and lock, press the HOLD key to cancel the Hold function, and the instrument will continue to test normally

packing list:
1 xDigital Thermometer
1 x Temperature Probe
1 x User Manual

Notice:
Shipped Without Battery
ProductSiteLaunchDate : 2025-01-13T23:39:18.686Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 8
UnspscCode : 41110000