Cart 2 india

Specification
Brand : Eujgoov
BulletPoint1 : The module is made of premium material, with long lifespan and high realiability
BulletPoint2 : FUNCTION-- The converter module can convert 0~200hz digital into 0~10V analog , easy to use
BulletPoint3 : GOOD PEROFRMANCE-- The Converter Module adopts professional and practical design for premium working performance.
BulletPoint4 : USED FOR-- The module can be used for interface conversion between PLC and frequency converter or matching control of interface between motion control card and frequency converter.
BulletPoint5 : FEATURE-- Input pulse level of 5/12/24V can be directly input without .But input frequency should maintain more than 0.5 seconds.
Color : Multicolor
ExternallyAssignedProductIdentifier : 8697939935798
ExternallyAssignedProductIdentifier1 : 738582770225
ExternallyAssignedProductIdentifier2 : 0738582770225
IncludedComponents : inc
InterfaceType : Parallel
ItemName : Walfront Frequency to Voltage Converter Module 0200hz to 010V Conversion Module Digital to Analog Converter
ItemPackageDimensions_Height : 9.4996 centimeters
ItemPackageDimensions_Length : 1.7018 centimeters
ItemPackageDimensions_Width : 7.3914 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : digital-to-analog-converters
Manufacturer : Eujgoov
Material : Plastic
ModelNumber : WALFRONT8aknmswc5i
MountingType : DIN Rail
NumberOfChannels : 1
NumberOfItems : 1
NumberOfPins : 12
PartNumber : WALFRONT8aknmswc5i
ProductDescription : Specification:
Item Type:Frequency to Voltage Converter Module
Size:4.5 x 4.7 x 1.7cm / 1.77 x 1.85 x 0.67in
Relationship,Linearity:
20Hz to 1V
100hz to 5V
200hz to 10V

Package List:
1 x Converter Module

Note:
1. The multi-turn potentiometer on the board is used to calibrate the corresponding relationship between frequency and voltage.
2. The input power supply voltage range is 12-30VDC. It is recommended that the power supply voltage be 15-24VDC. When the 12V level is used, the power supply cannot be powered by 12VDC. At least 15VDC power supply is required. If you need to use 12V power supply, you can also order 12VDC. Power converter.
At 24 levels, the power supply needs to be powered by 24VDC
3. The input end is isolated by diaphragm. Guaranteed anti-interference ability.
4. If you need to use PLC, support NPN type. Must have a ground wire.
5, if you need to use the encoder, the encoder is required to continue to rotate at a constant speed for more than 0.5 seconds.
6, frequency and voltage conversion module, response time is about 0.3-0.5 seconds.
7. If the input is turbine , etc., due to matching, an 817 diaphragm and a resistor must be added to match the flowmeter to normal function.
8. Correspondence in use If there is a deviation, you can adjust the blue potentiometer on the board to calibrate. At the time of shipment, we have adjusted the F/v potentiometer to a certain correspondence. It is generally not recommended to adjust it by itself.

ProductSiteLaunchDate : 2019-11-01T14:16:11.676Z
Style : Digital
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 39121000