Cart 2 india

Specification
Brand : 4SPRAY
BulletPoint1 : ✔️ EFFECTIVE MIXING AND AGITATION – 4Spray tank mixing agitation nozzles are designed to convert high fluid input velocity into a low pressure zone that induces surrounding liquid in the tank to enter into the nozzle and recirculate, thus effectively mixing the tank contents.
BulletPoint2 : ✔️ ECONOMICAL TO OPERATE – The amount of fluid that exits the nozzle is three to five times the amount of fluid that is pumped. This multiplier effect allows greater mixing efficiency while using smaller pumping capacity in open or closed tanks.
BulletPoint3 : ✔️ MINIMAL MAINTENANCE & CLOG RESISTANT – 4Spray tank mixing agitation nozzles require minimal maintenance with proven results. With no moving parts, our eductors are inherently clog resistant for reducing required maintenance and maximizing flow.
BulletPoint4 : ✔️ IMMEDIATE AND CONTINUOUS MIXING – Our eductor design allows the fresh feed to be supplied to the nozzle inlet rather than recycling it from the tank. This allows immediate mixing of the fresh feed with the contents of the tank, and then continuous mixing as the exit jet propagates downstream.
BulletPoint5 : ✔️ PERFORMS IN TEMPERATURES UP TO 300° C – 4Spray’s 316 stainless steel tank mixing nozzles allow you to mix fluids with temperatures up to 300° C for high-heat and high-performance situations.
Color : Cranberry
ExternallyAssignedProductIdentifier : 7689760046751
ExternallyAssignedProductIdentifier1 : 0746202000379
ExternallyAssignedProductIdentifier2 : 746202000379
IncludedComponents : F-NPT
ItemName : Eductor Nozzle - F-NPT Fluid Mixing Eductors - 316 Stainless Steel - Minimal Maintenance and Clog Resistant Tank Mixing Agitation Nozzles - 2 Inches (1 Count)
ItemPackageDimensions_Height : 2.7 inches
ItemPackageDimensions_Length : 5 inches
ItemPackageDimensions_Width : 2 inches
ItemTypeKeyword : industrial-hose-dispensing-nozzles
Manufacturer : 4Spray
Material : Stainless Steel
ModelName : 1
ModelNumber : 24OCT166O
NumberOfItems : 1
PartNumber : HEYZAKKA
ProductDescription : 4Spray’s Eductor Tank Mixing Agitation Nozzles are designed to convert high input fluid velocity into low pressure recirculation for effective mixing and agitation. The amount of fluid that exits the nozzle is three to five times the amount of fluid pumped. Our nozzles require minimal maintenance and are inherently clog-resistant for immediate and continuous mixing at temperatures up to 95° CWhat Do Eductor Tank Mixing Agitation Nozzles Do?Tank mixing is necessary to keep contents and solutions thoroughly mixed, proper chemical/biological reactions, homogenization of products, sediment build-up prevention, proper draining/pumping.4Spray tank mixing nozzles greatly reduce the complexity, capital cost, and maintenance requirements of any system by utilizing a pump and submerged spray nozzles, in place of conventional mechanical components, to mix immiscible liquids or solids that need to be kept suspended.Common Applications for Tank Mixing NozzlesWaste water treatment plantsOil and gas storage tanksDrinking water holding tanks and reservoirsAerobic & anaerobic digestersHomogenize tank contents when pumping/drainingSweep sludge & sediment from tank bottomsBlending ethanol and bio-dieselParticulate/solid suspensionTransport tankersChemical injection/mixingAcid/chemical storage tanksSlurry mixing/holding tanksLake/river water inletsSteam/air injectionAquarium and Aquatic usePlating tanks, Cleaning tanksPhosphating tanksE-coat tanksFertilizer tanksPulp tanksSludge tanksPaint boothsAnodizing tanksCooling towers and decorative fountains4Spray PPL tank mixing nozzles are available in sizes from 1/4 inch to 1.5 inch.
ProductSiteLaunchDate : 2024-10-29T19:36:11.314Z
Size : 2.5 points
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40141600