Cart 2 india

Specification
Amperage : 1 amps
Brand : All American
BulletPoint : Includes 20 pieces
BulletPoint1 : I.D. Tolerance of +.0001/.0005
BulletPoint2 : Concentricity of 0 to .0003 Total indicator reading maximum
BulletPoint3 : Heat treated to Rockwell C62 to 64.
BulletPoint4 : No Counterbored
BulletPoint5 : ✅【Easy to Use】Attaching the deburring external chamfer tool to the end of your electric drill, starting with a lowest speed, then slightly apply pressure to remove the burr and increase the speed as needed. Note: Do not turn on the driver until the bit fully covers the screw/bolt. Otherwise, the drill bit would bump over the screws/bolts, making it difficult to control.
BulletPoint6 : Material: Cobalt High
BulletPoint7 : Applicable holders/handles: NG1000, SN holder, S holder
CoarsenessRating : Unisex
Color : Silver
CompatibleMaterial : Plastic
CuttingAngleString : 82.0 degrees
ExternallyAssignedProductIdentifier1 : 0797424738755
ExternallyAssignedProductIdentifier2 : 797424738755
ExternallyAssignedProductIdentifier3 : 0702382345785
ExternallyAssignedProductIdentifier4 : 7290003234967
ExternallyAssignedProductIdentifier5 : 0702382529864
HandOrientation : Refer to description
IncludedComponents : No
ItemDisplayWeight : 0.04 pounds
ItemName : All American Type PM Bushing, 7.1mm ID x 12mm OD x 20mm L, Drill Bushing C1144 Steel, Heat Treated to Rockwell C62 to 64 Made in USA
ItemPackageDimensions_Height : 16.4084 centimeters
ItemPackageDimensions_Length : 6.5024 centimeters
ItemPackageDimensions_Width : 12.4968 centimeters
ItemPackageQuantity : 1
ItemShape : Refer to Description
ItemTypeKeyword : drill-adapters
Manufacturer : All American Bushing
Material : Cobalt
MetalType : Refer to description
ModelName : S100 Cobalt High
ModelNumber : BS1018
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : PM12-20-7.1
Pattern : Refer to description
ProductDescription : All American Drill Bushing are made in the USA from steel obtained from a domestic steel foundry. Our standard bushings are made of C1144 and heat treated to Rockwell C62-64. Concentricity is held at 0 to .0003 T.I.R maximum for ID sizes of 1/8 to ½ and 0 to .0005 T.I.R Max for any other size. A blended Radius on the drill entrance improves drill entry and alignment which prevents tool wear and breakage. All of our products are free of conflict materials of any kind and conform to Reach.
ProductSiteLaunchDate : 2014-11-20T08:00:00.000Z
Size : 9.84inch
Style : Industrial
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Wood
UnitCount : 1