Cart 2 india

Specification
Brand : HHIP
BulletPoint1 : Made of high-quality tool steel
BulletPoint2 : Solid sockets with Morse taper holes are used to adapt Morse Taper tools to straight turrets
BulletPoint3 : The size of the socket is dictated by the machine it is used on
BulletPoint4 : A larger taper might be a better choice if adapters are available to use a smaller taper in a larger socket
ExternallyAssignedProductIdentifier1 : 769053114309
ExternallyAssignedProductIdentifier2 : 0769053114309
IncludedComponents : Long Solid Socket with 4 Meter Morse Taper Hole
ItemName : HHIP 3700-0346 Long Solid Socket with 4 Morse Taper Hole, 1-1/2 x 6-Inch Size
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 8 inches
ItemPackageDimensions_Width : 2 inches
ItemPackageQuantity : 1
ItemTypeKeyword : drill-adapters
Manufacturer : HHIP
ModelNumber : 3700-0346
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 3700-0346
ProductDescription : All American Drill Bushing are made in the USA from steel obtained from a domestic steel foundry. Our standard bushings are made of C1144 and heat treated to Rockwell C62-64. Concentricity is held at 0 to .0003 T.I.R maximum for ID sizes of 1/8 to ½ and 0 to .0005 T.I.R Max for any other size. A blended Radius on the drill entrance improves drill entry and alignment which prevents tool wear and breakage. All of our products are free of conflict materials of any kind and conform to Reach.
ProductSiteLaunchDate : 2024-06-27T23:35:50.523Z
Size : 1-1/2" Socket OD
Style : 4MT
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 27111700