Cart 2 india

Specification
Brand : MuChaIOAK
BulletPoint1 : 【High Efficiency】This pile driver is equipped with a powerful 52cc two-stroke gasoline engine. Its max rotational speed reaches up to 6500r/min with a power of 1900W(2.3HP), so it operates very efficiently.
BulletPoint2 : 【Stable Operation】Our machine is two-stroke powered, it doesn't pull cylinders or stall easily even when the temperature is high. It can work stably. So you can buy and use it with confidence.
BulletPoint3 : 【Quick&Firm Replacement】The socket with high hardness and thread design can be quickly replaced according to the size of the pile, and the deep thread can ensure firm fixation.
BulletPoint4 : 【Large Capacity Semi-Transparent Fuel Tank】This pile driver has a 1L/0.26gal large capacity fuel tank. And the fuel tank is semi-transparent, so you can keep an eye on the usage of the fuel, which brings you a more reassuring feeling of use.
BulletPoint5 : 【Money-Saving】It adopts a high-quality carburetor, which can make gasoline fully burned when running, avoiding gasoline waste and saving money for you.
Color : Red
DrillType : hammer_drill
IncludedComponents : 1 x Petrol Post Driver 2 x Post Driving Head 1 x Mixing Oil Bottle 1 x Tools Kit
ItemName : 52CC 2 Stroke Gas Powered Pile Driver, 2.3HP Gas Powered T Post Driver, T Post Farm Fence Gasoline Pile Driver with 2 Post Driving Head, Single Cylinder Air Cooling, 1900W 6500r/min
ItemTorque : 2.5 newton_meters
ItemTypeKeyword : power-drill-drivers
Manufacturer : MuChaIOAK
Material : Metal
MaximumPower : 1900 watts
MaximumRotationalSpeed : 6500 rpm
MaximumTorque : 2.5 newton_meters
ModelName : /
ModelNumber : MZ15-048
PowerSourceType : Gas Powered
ProductDescription :

Application

This pile driver is suitable for fencing, star pickets, posts, stakes, pipe driving, gardening, agriculture, geophysical exploration, construction, etc.

 

 

Specification

Engine Type: Two-stroke, Air Cooling, Single-cylinder

Displacement: 52cc

Fuel Tank Capacity: 1L/0.26gal

Fuel Consumption Rate: ≤0.6L/h

Impact Frequency: 1300-3000BPM

Impact Energy: 20-55J

Carburetor Type: MZ15-048

Spark Plug Type: BM6A

Starter System: Hand Pull Start

Fuel Type: Mixed Oil (25 Gasoline: 1 Motor Oil)

Size: approx. 74*34*26cm/29.13*13.39*10.24in

Post Driving Head Mount Size: 55-70mm/2.17-2.76in

Max. Power & Speed: 1900W(2.3HP)/6500r/min

Max. Torque & Speed: 2.5N.m/5500r/min

 

 

Package Included

1 x Petrol Post Driver

2 x Post Driving Head

1 x Mixing Oil Bottle

1 x Tools Kit

 

 

Notes

If the pile driver has the problem of not hammering. Then you need to check whether you have added too much grease, clean up the excess oil in the cylinder before disassembly, and re-add about 20g of high temperature resistant grease.

If the impact frequency is too high, you can reduce the speed of the carburetor slightly if you can't hold it by hand. Otherwise, the impact frequency should be increased.

If the machine does not start easily, first check the ratio of oil: gasoline: oil = 25:1, be sure to use a good two-stroke oil. Start the rope pull out an arm's length, and pull it two or three times in a row to start. When the machine starts cold, close the damper, and then open the damper after the machine is normal.

Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you don't mind before you order.

ProductSiteLaunchDate : 2024-03-01T07:14:52.117Z
RegulatoryComplianceCertification : NSDOS.0384EM-005
Speed : 6500 rpm
SupplierDeclaredDgHzRegulation : other
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112700
Voltage : 110 volts
Wattage : 1900 watts