Cart 2 india

Specification
Brand : Wera Tools
BulletPoint1 : Features Wera Kraftform handle for TORX socket screws, TX 20 x 65mm shaft
BulletPoint2 : Factory pre-set to torque values recommended by leading carbide tool manufacturers
BulletPoint3 : Unlimited loosening torque to loosen seized screws
BulletPoint4 : Multi-component Kraftform handle fits the shape to the hand for the ultimate in comfort and high speed torque transfer
BulletPoint5 : 【Money-Saving】It adopts a high-quality carburetor, which can make gasoline fully burned when running, avoiding gasoline waste and saving money for you.
Color : Multi
DrillType : hammer_drill
ExternallyAssignedProductIdentifier1 : 4013288131904
ExternallyAssignedProductIdentifier2 : 4013288099143
ExternallyAssignedProductIdentifier3 : 04013288131904
ExternallyAssignedProductIdentifier4 : 04013288099143
GpsrSafetyAttestation : 1
IncludedComponents : 1 x Petrol Post Driver 2 x Post Driving Head 1 x Mixing Oil Bottle 1 x Tools Kit
ItemDisplayWeight : 102 grams
ItemName : Wera 05027936001 Kraftform 300 TX Torque-Indicator Torx Screwdriver, Pistol Handle, TX20 Head, 65mm Blade Length
ItemPackageDimensions_Height : 22 centimeters
ItemPackageDimensions_Length : 5.4 centimeters
ItemPackageDimensions_Width : 8.6 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTorque : 2.5 newton_meters
ItemTypeKeyword : screwdrivers
Manufacturer : Wera Tools
Material : Metal
MaximumPower : 1900 watts
MaximumRotationalSpeed : 6500 rpm
MaximumTorque : 2.5 newton_meters
ModelName : 05027936001
ModelNumber : 05027936001
NumberOfItems : 1
PackageLevel : unit
PartNumber : 05027936001
Pattern : Solid
PowerSourceType : Gas Powered
ProductDescription :

Application

This pile driver is suitable for fencing, star pickets, posts, stakes, pipe driving, gardening, agriculture, geophysical exploration, construction, etc.

 

 

Specification

Engine Type: Two-stroke, Air Cooling, Single-cylinder

Displacement: 52cc

Fuel Tank Capacity: 1L/0.26gal

Fuel Consumption Rate: ≤0.6L/h

Impact Frequency: 1300-3000BPM

Impact Energy: 20-55J

Carburetor Type: MZ15-048

Spark Plug Type: BM6A

Starter System: Hand Pull Start

Fuel Type: Mixed Oil (25 Gasoline: 1 Motor Oil)

Size: approx. 74*34*26cm/29.13*13.39*10.24in

Post Driving Head Mount Size: 55-70mm/2.17-2.76in

Max. Power & Speed: 1900W(2.3HP)/6500r/min

Max. Torque & Speed: 2.5N.m/5500r/min

 

 

Package Included

1 x Petrol Post Driver

2 x Post Driving Head

1 x Mixing Oil Bottle

1 x Tools Kit

 

 

Notes

If the pile driver has the problem of not hammering. Then you need to check whether you have added too much grease, clean up the excess oil in the cylinder before disassembly, and re-add about 20g of high temperature resistant grease.

If the impact frequency is too high, you can reduce the speed of the carburetor slightly if you can't hold it by hand. Otherwise, the impact frequency should be increased.

If the machine does not start easily, first check the ratio of oil: gasoline: oil = 25:1, be sure to use a good two-stroke oil. Start the rope pull out an arm's length, and pull it two or three times in a row to start. When the machine starts cold, close the damper, and then open the damper after the machine is normal.

Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you don't mind before you order.

ProductSiteLaunchDate : 2012-03-28T05:32:30.709Z
RegulatoryComplianceCertification : NSDOS.0384EM-005
Size : TX 20 Head, Pistol Handle
Speed : 6500 rpm
Style : Torx
SupplierDeclaredDgHzRegulation : other
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27111700
Voltage : 110 volts
Wattage : 1900 watts