Cart 2 india

Specification
Brand : Marhynchus
BulletPoint1 : Simple Power Supply: You can use a power bank (5V DC) as the power source, or use 4pcs AA battery boxes and install batteries for power supply.
BulletPoint2 : Easy to Use: This DIY electronic watering kit has become extremely popular since it automatically waters your plants and flowers according to monitor the soil in a very efficient way.
BulletPoint3 : Convenient to Install: This watering kit does not require programming, does not include a single chip microcomputer, just assemble according to the schematic diagram, and easy to use.
BulletPoint4 : Intelligent: This automatic irrigation module DIY kit with soil probe, provide intelligent detection and sensing.
BulletPoint5 : Warm Tip: The sensitivity can be roughly adjusted with a potentiometer, enough for daily use of irrigation.
Color : GREEN
ControlType : Manual Adjustment
ExternallyAssignedProductIdentifier1 : 0680585376228
ExternallyAssignedProductIdentifier2 : 680585376228
FitType : Flexible
IncludedComponents : inc
ItemName : 5V DIY Electronic Watering Kit Automatic Irrigation DIY Kit Self Watering System Module Soil Sensor Pump
ItemPackageDimensions_Height : 14.7 centimeters
ItemPackageDimensions_Length : 4.3 centimeters
ItemPackageDimensions_Width : 13.1 centimeters
ItemPackageQuantity : 1
ItemShape : Cylindrical
ItemTypeKeyword : automatic-lawn-drip-irrigation-kits
Manufacturer : Marhynchus
Material : Material
ModelName : 5V DIY Electronic Watering Kit
ModelNumber : 5dc1dff6-a068-4d26-98da-52cbbfec040e
NumberOfItems : 1
NumberOfPieces : 7
NumberOfSets : 1
PartNumber : Marhynchuspgidgsw7c21372
Pattern : Linear
PlantOrAnimalProductType : rubber
PowerSourceType : Battery Powered
ProductDescription : Product Testing: 
1. Test The Relay Module: Connect the relay module VCC to 5V, connect GND to ground, connect IN to GND, the relay will jump, and if IN is floating, the relay will recover. Repeatedly, you can hear the relay "click" sound;
2. Test The Soil Moisture Sensor Module: Connect the fork probe and the transmitter module with two jump wires, connect the transmitter module VCC to 5V, and GND to ground. The red power light is always on as soon as it is powered on, and the green (blue) indicator light flashes faintly once; insert the fork probe directly into the water, the green (blue) indicator light is on;
3. Connect the red wire of the water pump to 5V, the black wire to ground, and the water pump works. Pay attention to the test for 1 second, and do not work in the air for a long time;
4. Assemble according to the schematic diagram.

Specification:
Item Type: DIY Electronic Watering Kit
Power Supply Voltage: 5V

Package List:
1 x Relay Module
1 x Soil Moisture Probe
1 x Comparison Module
1 x Small Water Pump
1 x Battery Case
1 x Silicone Water Pipe(default about 90cm) 
12 x Jump Wire


ProductSiteLaunchDate : 2022-03-19T00:00:00.000Z
SafetyWarning : Adjust the sensitivity with a potentiometer for daily use. Test the water pump for 1 second and avoid operating it in the air for extended periods. Use the kit according to the instructions for safe and efficient watering.
Style : Self Watering,Automatic,Battery
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 46171600
VolumeCapacityName : 90 cm Water Pipe