Cart 2 india

Specification
Brand : Mister Landscaper
BulletPoint : Made in the USA
BulletPoint1 : Suitable for 4/7 mm (Inner/Outer diameter) tube.
BulletPoint2 : The bottom is sharp, easy to plug into soil.
BulletPoint3 : Irrigation angle: each dripper has 8 exit holes at the top, provide 360 degree coverage in multiple flow directions, unique umbrella spray mode
BulletPoint4 : Adjusting the water flow: the water flow can be adjusted by rotating the water outlet cover, adjust the amount of water according to actual needs, let plants grow healthily and save water resources
BulletPoint5 : Perfect for the irrigation of your flower, plants, lawn,agriculture, villas, industrial irrigation!
Color : Black/Violet
ControlType : Adjustable
ExternallyAssignedProductIdentifier1 : 720413203101
ExternallyAssignedProductIdentifier2 : 0720413203101
ExternallyAssignedProductIdentifier3 : 00013158775003
FitType : Barbed
GpsrSafetyAttestation : 1
IncludedComponents : Plastic
ItemName : Mister Landscaper 10 GPH Violet Flow Controller
ItemPackageDimensions_Height : 9.2964 centimeters
ItemPackageDimensions_Length : 1.7018 centimeters
ItemPackageDimensions_Width : 8.2042 centimeters
ItemPackageQuantity : 2
ItemShape : Cylindrical
ItemTypeKeyword : automatic-lawn-drippers
Manufacturer : Mister Landscaper
Material : Plastic
Material1 : Plastic
Material2 : Silicone
Material3 : Polyethylene
MaximumFlowRate : 70 liters_per_hour
MaximumPressure : 50 pounds_per_square_inch
ModelName : MLS-V10
ModelNumber : MLS-V10
NumberOfBoxes : 1
NumberOfItems : 20
NumberOfPieces : 2
NumberOfSets : 50
PartNumber : MLS-V10
PlantOrAnimalProductType : plastic
PowerSourceType : Water Pressure-driven
ProductDescription : 10-Count Bag of NEW Flow Restrictors Use this NEW Flow Restrictor to replace damaged violet flow controls on the CURRENT AND OLDER VERSION (MLS-V10-OLD) of the micro-stake assemblies. This newly designed and improved Violet Flow Restrictor minimizes clogging as it does not contain a diaphragm To Install, push the slanted angled barbed end into the ¼” Vinyl Tubing, and then push the blunt barbed end with a small orifice into the ½” Poly Tubing. This New Flow Restrictor does not need an internal diaphragm to help keep water flow consistent at various water pressures. This Flow Restrictor allows you to install more micro-stake assemblies per run. With a beginning water pressure of 40 to 50 PSI, you can run up to 40 of our micro-stake assemblies with a consistent flow of 9 to 15 GPH per each micro- spray. When installing a lesser amount of our micro-stake assemblies per run with a beginning water pressure of 40 psi, there is a consistent water flow of approximately 15 gph from each micro spray. In the event this NEW Flow Restrictor had a piece of debris block the orifice, simply pull the barbed end out of the ½” Poly and use our Yellow Cleaning Tool or a small paper clip to clear the orifice, then push the barbed end back into the1/2” Poly Tubing. Next, unthread the micro spray from the top of the Stake Assembly and turn on the water to flush the ¼” vinyl of debris for a few seconds and then re-thread the micro spray back into the top of the Stake. (10 New Violet Flow Restrictors Per Bag)
ProductSiteLaunchDate : 2012-01-19T19:44:09.060Z
SafetyWarning : Always follow safety guidelines when handling plastic components, connecting to water sources, and installing the drip irrigation system to prevent leaks and water damage.
Size : 1/4 Inch
SkipOffer : 1
Style : Minimalist
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 21100000
VolumeCapacityName : 1 GPH