Cart 2 india

Specification
Brand : Shorpioen
BulletPoint1 : Hammer drives are considered to be light-duty anchors. They are designed for attaching termination bar to solid concrete, solid brick, block or masonry walls. Its advantages include ease of installation, its immediate loading capabilities and the tamper-resistant nature of the finished assembly
BulletPoint2 : Anchor: Zinc Alloy. Pin: Type 304 stainless steel
BulletPoint3 : Hammer drive anchors shall not be removable when set in concrete of 3000 psi compressive strength and subjected to the test loads in an axial direction, as specified in the above table. The masonry shall show no evidence of failure attributable to the an
BulletPoint4 : Can also be used like a toggle bolt in wallboard or plaster, or as a blind rivet in joining several thicknesses of material together, especially in applications subject to vibration. The nylon withstands temperatures from -40°F to 170°F.
BulletPoint5 : Body: Injection molded thermoplastic nylon ---- Expander Pin: AISI 1018-1021 or equivalent cold rolled steel, zinc plated
Color : Metallic
ExternallyAssignedProductIdentifier : 5059397142768
ItemName : 1/4X1 1/4 Mushroom Head Hammer Drive Anchor 18 8 Stainless Steel (Pack Qty 100) BC-1420ADH188 by Shorpioen
ItemPackageQuantity : 100
ItemTypeKeyword : drive-anchors
Manufacturer : Shorpioen LLC
Material : 18-8 Stainless
ModelNumber : BC-1420ADH188
NumberOfItems : 100
PartNumber : BC-1420ADH188
ProductDescription : PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot. Hammer drives are considered to be light-duty anchors. They are designed for attaching termination bar to solid concrete, solid brick, block or masonry walls. Its advantages include ease of installation, its immediate loading capabilities and the tamper-resistant nature of the finished assembly. Anchor: Zinc Alloy. Pin: Type 304 stainless steel. Hammer drive anchors shall not be removable when set in concrete of 3000 psi compressive strength and subjected to the test loads in an axial direction, as specified in the above table. The masonry shall show no evidence of failure attributable to the anchor.
ProductSiteLaunchDate : 2016-11-17T16:09:03.698Z
Size : 1/4X1 1/4
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnspscCode : 46182300