Cart 2 india

Specification
Brand : Shorpioen
BulletPoint1 : A fastening system which consists of two parts: (1) a nylon piece similar in design to a blind rivet which has a cylindrical shank split extending completely around its circumference. Mushroom, pan and flat head styles are available;
BulletPoint2 : (2) a steel pin expander which passes through a concentric channel extending from an opening in the top of the head of the nylon piece down into the shank to a point just below the spot where the split ends below the head. The pin has a slot across the to
BulletPoint3 : Installation is achieved by inserting the end of the nylon shank into a pre-drilled hole and hammering the head of the nail until it meets the head of the anchor body. Driving the nail through the body expands the split ends which allows the ribs to grip
BulletPoint4 : Can also be used like a toggle bolt in wallboard or plaster, or as a blind rivet in joining several thicknesses of material together, especially in applications subject to vibration. The nylon withstands temperatures from -40°F to 170°F.
BulletPoint5 : Body: Injection molded thermoplastic nylon ---- Expander Pin: AISI 1018-1021 or equivalent cold rolled steel, zinc plated
ItemName : 3/16X1 Mushroom Head Nail in Anchor Nylon (Pack Qty 100) BC-1016ANM by Shorpioen
ItemPackageQuantity : 100
ItemTypeKeyword : drive-anchors
Manufacturer : Shorpioen LLC
Material : Nylon
ModelNumber : BC-1016ANM
NumberOfItems : 100
PartNumber : BC-1016ANM
ProductDescription : PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot. A fastening system which consists of two parts: (1) a nylon piece similar in design to a blind rivet which has a cylindrical shank split extending completely around its circumference. Mushroom, pan and flat head styles are available;. (2) a steel pin expander which passes through a concentric channel extending from an opening in the top of the head of the nylon piece down into the shank to a point just below the spot where the split ends below the head. The pin has a slot across the top of its head, a chiseled point similar to a nail, and threads on its own shank which helps to lock the anchor in place upon installation.. Installation is achieved by inserting the end of the nylon shank into a pre-drilled hole and hammering the head of the nail until it meets the head of the anchor body. Driving the nail through the body expands the split ends which allows the ribs to grip the wall of the prepared hole. This is a light duty anchor for use in solid materials such as concrete, brick and block, preferred when fixtures must be attached without chipping the fixture or the masonry.. Can also be used like a toggle bolt in wallboard or plaster, or as a blind rivet in joining several thicknesses of material together, especially in applications subject to vibration. The nylon withstands temperatures from -40°F to 170°F.. Body: Injection molded thermoplastic nylon ---- Expander Pin: AISI 1018-1021 or equivalent cold rolled steel, zinc plated.
ProductSiteLaunchDate : 2016-11-17T16:09:24.454Z
Size : 3/16X1
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnspscCode : 31161500