Cart 2 india

Specification
Brand : Shorpioen
BulletPoint1 : A light-duty anchor for use with dead loads in concrete or stone. The opening in the base of the anchor is of a size which, when under pressure, the anchor will try to regain, which creates the pressure on the inner walls of the hole, holding the fastening in Heat treated AISI 1038 or an equivalent alloy steel
BulletPoint2 : Heat treated AISI 1038 or an equivalent alloy steel
BulletPoint3 : Hammer drive anchors shall not be removable when set in concrete of 3000 psi compressive strength and subjected to the test loads in an axial direction, as specified in the above table. The masonry shall show no evidence of failure attributable to the an
BulletPoint4 : Can also be used like a toggle bolt in wallboard or plaster, or as a blind rivet in joining several thicknesses of material together, especially in applications subject to vibration. The nylon withstands temperatures from -40°F to 170°F.
BulletPoint5 : Body: Injection molded thermoplastic nylon ---- Expander Pin: AISI 1018-1021 or equivalent cold rolled steel, zinc plated
ItemName : 3/8X2 1/2 Round Head Split Drive Anchor Zinc (Pack Qty 25) BC-3740ADSPR by Shorpioen
ItemPackageQuantity : 25
ItemTypeKeyword : drive-anchors
Manufacturer : Shorpioen LLC
Material : Zinc
ModelNumber : BC-3740ADSPR
NumberOfItems : 25
PartNumber : BC-3740ADSPR
ProductDescription : PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot. A light-duty anchor for use with dead loads in concrete or stone. The opening in the base of the anchor is of a size which, when under pressure, the anchor will try to regain, which creates the pressure on the inner walls of the hole, holding the fastening in Heat treated AISI 1038 or an equivalent alloy steel. Heat treated AISI 1038 or an equivalent alloy steel.
ProductSiteLaunchDate : 2016-11-17T16:13:17.786Z
Size : 3/8X2 1/2
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnspscCode : 31161500