Cart 2 india

Specification
Brand : N C MORIN
BulletPoint1 : Material Zamac
BulletPoint2 : Designed to act as a permanent anchor in applications that do not require quick disassembly
BulletPoint3 : Recommended for light duty fastening in concrete, block, brick, and stone
BulletPoint4 : Common applications include masonry anchorage, drywall track, electrical fixtures, gutters, and brackets
BulletPoint5 : Anchor could pull out of material and fall when attempting to support an overhead load
BulletPoint6 : Has a 1/2" fixed mushroom washer head
Color : Silver
CompatibleGrooveDiameter : 0.25 inches
ExternallyAssignedProductIdentifier : 7667465050105
ExternallyAssignedProductIdentifier1 : 0749273242013
ExternallyAssignedProductIdentifier2 : 749273242013
FinishType : Silver
GradeRating : residential
ItemName : Hammer Drive Anchor 1/4" Diameter (10, 1-1/4 inch Long)
ItemPackageDimensions_Height : 5.7912 centimeters
ItemPackageDimensions_Length : 2.1082 centimeters
ItemPackageDimensions_Width : 5.7912 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : drive-anchors
Manufacturer : Generic1
Material : Zinc-Aluminum Alloy (ZAMAC)
MeasurementSystem : inch
NumberOfItems : 10
PartNumber : 144HDABX
ProductDescription :
Applications The anchor is made from ZAMAC.
This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Dry environment.

Hole Diameter/Bit Diameter
The anchor requires a 1/4" hole to be drilled in the base material (Concrete, Block, and Brick).
The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 1/4".

Minimum Embedment
The minimum anchor embedment into the concrete is 3/4".
Therefore, the anchor must be installed so
that a minimum of 3/4" of the anchor is embedded into the concrete.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 2-1/2"
from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-1/4"
from an unsupported edge of the concrete.

ProductSiteLaunchDate : 2022-12-19T18:05:53.609Z
Size : 1-1/4 inch long
SpecificUsesForProduct : Concrete
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 46182300