Cart 2 india

Specification
AutoPartPosition : front
Brand : Diode Dynamics
BulletPoint1 : Compatible with Toyota FJ Cruiser Front Turn Signal bulbs.
BulletPoint2 : 48 LEDs in omnidirectional design.
BulletPoint3 : Plug and play, no modification needed.
BulletPoint4 : Cosmetic upgrade only.
BulletPoint5 : Backed with a 3-year warranty.
Color : Amber
ItemName : Diode Dynamics Front Turn Signal LEDs compatible with Toyota FJ Cruiser 2007-2012 (pair), 1157 HP48 Amber
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 10 inches
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-combination-driving-and-fog-light-assemblies
Manufacturer : Diode Dynamics
NumberOfItems : 1
PartNumber : DD0013P
ProductDescription :

Features

• Modern LED appearance with instant on and off.


• Compatible with Toyota FJ Cruiser front turn signal bulbs.


• Plug and play no modification with factory 1157 bulb size.


• Multiple brightness levels available.

Overview

LED Indicators. The factory incandescent turn signals on your vehicle illuminate in a slow glow taking a moment to turn off and on. With replacement LED bulbs you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to your vehicle.

Brightness. All Diode Dynamics LED lighting is rated with accurate measured lumen figures not calculations or guesses. We test the true output in-house and provide you the real numbers to compare.

Correct Color. You'll see that we only offer an amber color option which is correct to SAE/DOT amber requirements. Whether you have a clear lens or an amber reflector over the turn signal bulb on your vehicle amber is the correct emitter color for maximum turn signal output.

Reduced Load. When it comes to LED upgrades you'd think the lower power draw would be a great feature! However this can cause a hyperblink or fast-blinking turn signal which can be corrected with LED Resistors or an LED Flasher (sold separately).

The most basic tried-and-true method to correct hyperblinking is to add resistors (sold separately). Since a 6-ohm resistor uses about the same power as a standard turn signal bulb these can be used on any vehicle but does require tapping factory signals. One resistor is needed to replace each turn signal bulb.

ProductSiteLaunchDate : 2020-12-23T22:34:13.677Z
Size : HP48 (250 lumens)
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnspscCode : 25172907
Voltage : 12 volts