Cart 2 india

Specification
Brand : CONFAST
BulletPoint1 : Can only be used in solid concrete
BulletPoint2 : For use in dry, indoor applications
BulletPoint3 : Designated diameter equals inside diameter
BulletPoint4 : FLUSH MOUNT - Nothing sticks up above surface of the concrete
Color : Silver
ExternallyAssignedProductIdentifier1 : 820274000526
ExternallyAssignedProductIdentifier2 : 0820274000526
ItemName : CONFAST 3/8" (Inside/Screw 3/8"-16 Diameter) 304 Stainless Steel Drop-in Anchor with 1 Setting Tool (50 per Box)
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 5.5 inches
ItemPackageDimensions_Width : 2.5 inches
ItemPackageQuantity : 1
ItemShape : Block
ItemTypeKeyword : drop-in-anchors
Manufacturer : CONFAST
Material : Stainless Steel 304
NumberOfItems : 50
NumberOfPieces : 50
PartNumber : DIS38
ProductDescription : Applications
The anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.
Environment
The anchor is designed for use in a Wet environment.

Hole Diameter/Bit Diameter
The anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Minimum Embedment
The minimum anchor embedment into the concrete is 1-9/16". Therefore, the anchor must be installed so that a minimum of 1-9/16" of the anchor is embedded into the concrete.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 5" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 2-1/2" from an unsupported edge of the concrete.
ProductSiteLaunchDate : 2017-05-31T07:00:00.000Z
Size : 3/8"
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31161500