Cart 2 india

Specification
Brand : DAMO
BulletPoint1 : For 3/8" radius demi-bullnose / roundover edge;
BulletPoint2 : Fits on polishers/ grinders with 5/8"-11 thread spindle;
BulletPoint3 : Position 1 with coarse diamond grit 30/40;
BulletPoint4 : Utilizing vacuum brazed diamond technology;
BulletPoint5 : Wet or dry application, optimal speed 3,500- 4,000 RPM.
Color : Black
CustomerPackageType : Standard Packaging
CutType : Round-Over Cut
DrillType : basic_drill
ExternallyAssignedProductIdentifier1 : 857739003051
ExternallyAssignedProductIdentifier2 : 045635213487
ExternallyAssignedProductIdentifier3 : 0857739003051
ExternallyAssignedProductIdentifier4 : 0045635213487
ExternallyAssignedProductIdentifier5 : 00765573829549
FinishType : Silver
GpsrSafetyAttestation : 1
IncludedComponents : Shank Carbide Round Nose Groove Router Bit Set
ItemDisplayWeight : 0.12 pounds
ItemName : DAMO 3/8 inch Demi Bullnose & Half Bullnose Diamond Hand Profile Wheel, Hand Profiler, Coarse Grit Router Bit, 5/8-11 Thread, for Granite, Concrete, Marble, and Countertop Edge
ItemPackageDimensions_Height : 11.684 centimeters
ItemPackageDimensions_Length : 8.128 centimeters
ItemPackageDimensions_Width : 10.414 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : edge-treatment-and-grooving-router-bits
Manufacturer : DAMO Diamond Tools
Material : Diamond
Material1 : Carbide
Material2 : Carbon Steel
Material3 : Steel
MaximumChuckSize : 0.39 inches
MaximumPower : 1 watts
ModelNumber : BPB038P1
NumberOfBoxes : 1
NumberOfFlutes : 1
NumberOfItems : 1
PartNumber : BPB038P1
PowerSourceType : Wind Powered
ProductDescription :

With DAMO Hand Profilers, an operator with little or no fabrication skills can easily create a perfect edge profile of Ogee, Bullnose, Bevel or Roundovers. The DAMO Profilers may be used on the materials as follows: Granite, Engineered Stone, Porcelain, Marble and Limestone. Can be used on concrete also, but life will be short due to the abrasive nature of concrete.

DAMO Profilers can be used on any polishers or grinders with 5/8"-11 threaded spindles. A center water-feed polisher with 3500 RPM is recommended for the application. Optimal speed 3,500- 4,000 RPM. Adopting the latest “Vacuum Brazed Technology”, our profilers give you aggressive grinding action and longevity, without losing the shape of the profile, unlike the Sintered profilers on the market.

Press nylon guide down firmly on top of material and turn on polisher. Always apply sufficient downward pressure to prevent Nylon guide from spinning. (Nylon Guide should not "Spin Freely" during operation). Purpose of nylon guide is to assure the Profiler remains at the proper height so the profiled edge remains straight. The ball bearing/rotary touch within the Profiler will control the depth of grinding action to ensure the profiled edge remains straight and consistent. Application is complete when the operator can no longer hear grinding noise, and runoff water is clear.

Position 2 profiler of medium diamond grit is always recommended to be used after coarse Position 1 for better polishing result and higher efficiency.

We DAMO Diamond Tools, LLC, hold exclusive distribution to DAMO brand products seen clearly marked from the picture on the product listing.

ProductSiteLaunchDate : 2011-04-13T02:24:46.919Z
Size : 5 x 2.91 x 1.34 inches/3Pcs
StreetDate : 2018-08-01T00:00:01Z
Style : Coarse
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27112700