Cart 2 india

Specification
Brand : MAGNATE
BulletPoint1 : 1" Cutting Diameter; 2" Shank Length; 1/2" Shank Diameter; 1/8" & 1/2" Radius; 1/4" Profile Height
BulletPoint2 : 2 Flute
BulletPoint3 : 【Special Design】Round hardened shank gives extra strength and a smoother cut, produces smooth and rounded decorative edge.
BulletPoint4 : 【Wide Application】Can be used without the bearing as a standard straight bit, great for combined plunge-cutting and pattern/template routing. Used on hand held and table mounted portable routers, great router bit replacement for woodworking carpenters.
BulletPoint5 : 【Note】For increased work piece visibility, use shank bearing flush trim bit in a handheld router allowing the template to be positioned on top of the work piece.
Color : Grey
CutType : Carbide-Tipped Cut
CutType1 : Round-Over Cut
CutType2 : Beading
ExternallyAssignedProductIdentifier1 : 0637881875511
ExternallyAssignedProductIdentifier2 : 637881875511
ExternallyAssignedProductIdentifier3 : 00664252037339
ExternallyAssignedProductIdentifier4 : 00000346302707
GpsrSafetyAttestation : 1
IncludedComponents : CMT Orange Tool 83804 CMT CONTRACTOR® ROUNDOVER & BEADING BITS
ItemName : Magnate 7551 Barley Twist Carbide Tipped Router Bit - 1" Cutting Diameter; 2" Shank Length
ItemPackageDimensions_Height : 11.6 centimeters
ItemPackageDimensions_Length : 3.6 centimeters
ItemPackageDimensions_Width : 10.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : edge-treatment-and-grooving-router-bits
Manufacturer : Magnate
Material : Carbide
ModelNumber : UT190823Y-2028
NumberOfFlutes : 2
NumberOfItems : 1
PackageLevel : unit
PartNumber : 7551
ProductDescription : This bit is designed to work with Legacy Ornamental machine to create traditional style barley twist. When combined with a upcut spiral bit they also form a beautiful hollow spiral. Can also be used for general grooving or flat moldings. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. In case a bit doesn't come with a speed chart. You may try the following suggestion. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness: Run 24,000 rpm maximum for 1" overall diameter router bits; Run 18,000 rpm maximum for 1-1/4" overall diameter router bits; Run 16,000 rpm maximum for 2-1/4" to 2-1/2" overall diameter router bits; Run 12,000 rpm maximum for 3" to 3-1/2" overall diameter router bits;
ProductSiteLaunchDate : 2007-06-29T22:27:11.000-00:00
Size : 1/4X7/8
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation1 : Metal
SurfaceRecommendation10 : Ceramic
SurfaceRecommendation11 : Engineered Wood
SurfaceRecommendation12 : Polyvinyl Chloride
SurfaceRecommendation13 : Acrylonitrile Butadiene Styrene
SurfaceRecommendation14 : Nylon
SurfaceRecommendation15 : Porcelain
SurfaceRecommendation16 : Glass
SurfaceRecommendation17 : Pine
SurfaceRecommendation2 : Wood
SurfaceRecommendation3 : Concrete
SurfaceRecommendation4 : Plastic
SurfaceRecommendation5 : Masonry
SurfaceRecommendation6 : Stone
SurfaceRecommendation7 : Cast Iron
SurfaceRecommendation8 : Iron
SurfaceRecommendation9 : Brass
UnitCount : 1
UnspscCode : 27111701
Voltage : 120 volts