Cart 2 india

Specification
Brand : Ultra-Shear
BulletPoint1 : SPECS - US2375JG | 3/8" Cove/Nose | 30° Chamfer | 5/16" Cut Length | 1/4" Shank | 3 Flute | Carbide Head | Made in USA
BulletPoint2 : UNIQUE CHAMFER - The Juice Groove Router Bit has a unique chamfer that leads into the cove. This simplifies sanding and improves juice flow by eliminating the sharp edge created by common ball-nose bits.
BulletPoint3 : INCREASED EFFICIANCY - The 3-flute design reduces the chip load of each cut by 33% and increases cut per inch by 50%. Resulting in clean, smooth cuts both with and across the grain.
BulletPoint4 : WORKS WITH - The Juice Groove Bits are compatible with any hand held router, CNC or Shaper Origin with a 1/4" collet.
BulletPoint5 : MADE IN USA - Ultra-Shear Juice Groove Router Bits are made in our Strongsville, Ohio facility just south of Cleveland.
CutType : Carbide
ExternallyAssignedProductIdentifier1 : 810137203904
ExternallyAssignedProductIdentifier2 : 0810137203904
ExternallyAssignedProductIdentifier3 : 0100076927727
ExternallyAssignedProductIdentifier4 : 0664252004409
ExternallyAssignedProductIdentifier5 : 00664252004409
GpsrSafetyAttestation : 1
IncludedComponents : Juice Groove Router Bit - 3/8" Cove - 30° Chamfer
ItemName : Ultra-Shear Juice Groove Router Bits, 3/8" Cove with 30° Chamfer, Carbide Head, USA Made, 3 Flute, CNC Bits for Cutting Board Grooves - US2375JG
ItemPackageDimensions_Height : 1.75 inches
ItemPackageDimensions_Length : 8 inches
ItemPackageDimensions_Width : 4.25 inches
ItemPackageQuantity : 1
ItemTypeKeyword : edge-treatment-and-grooving-router-bits
Manufacturer : Woodpeckers
Material : Carbide Head
ModelNumber : 838.990.11
NumberOfFlutes : 3
NumberOfItems : 1
PackageLevel : unit
PartNumber : US2375JG
ProductDescription :

Ultra-Shear Juice Groove Bits take your cutting board projects to a new level of professionalism while saving you time & effort. Each of the 3 patterns has a unique chamfer that leads into the cove. This simplifies sanding & improves juice flow by eliminating the sharp edge created by common ball-nose bits. With 3 different styles to choose from, one is sure to fit your cutting board design.

All 3 patterns allow you some flexibility in the final appearance of your groove. Make them shallow enough that the chamfer just breaks the edge or increase the depth of cut & create a wider chamfer that adds another element. The first two bits have a full cove shape in 3/8" and 1/2" diameters & 30° lead-in chamfers. The third design is a 45° vee-groove with a 1/4" radius at the tip.

For easy and adaptable juice groove cutting, use an internal template and a template guide bushing in your router base. Our special 1" OD, 7/32” long guide bushing fits any P-C style router base. Shape a 1/4" piece 1" narrower than the groove center, attach with tape, and move counter-clockwise. For cordless palm routers, use our StabilMax Trim Router Base for better balance.

The Juice Groove Bits are compatible with CNCs & Shaper Origin. Program any pattern you want & cut away. The 3-flute design reduces the chip load by 33% & increases cuts per inch by 50%, resulting in clean, smooth cuts both with & across the grain.

The Juice Groove Bits & the template guide bushing are all available individually, or as a Set which includes all 3 Juice Groove Bits & the template guide bushing. Like all Woodpeckers products, Ultra-Shear Juice Groove Bits are made right here in our Strongsville, Ohio, facility just south of Cleveland. You won’t find an American-made bit of similar design for less.

ProductSiteLaunchDate : 2024-06-18T15:12:45.331Z
Size : 1/2 Inch Shank
Style : 3/8 Nose 30
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27112800