Cart 2 india

Specification
Brand : BOSCH
BulletPoint : Razor sharp cutting edge diamond honed for smooth cuts
BulletPoint1 : 2pcs Chamfer End Mill With 60 & 90 Degree, 1/4" Shank Diameter, 2" Overall Length.
BulletPoint2 : The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End.
BulletPoint3 : 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface.
BulletPoint4 : Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55
BulletPoint5 : V Groove Router Bits Can Be Used in CNC, X carve, 3D carving, Router Hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets
BulletPoint6 : Ultra-long Life：The ATS Coating provide heat resistance and wear resistance,keep sharp enseure great performance and provide up to 2.5X tool life
Color : No Color
CutType : V Groove Cut
CutType1 : Chamfer Cut
CutType2 : Dovetail Cut
EndCutType : V Groove Cut
ExternallyAssignedProductIdentifier1 : 787721810810
ExternallyAssignedProductIdentifier2 : 045325738009
ExternallyAssignedProductIdentifier3 : 0787721810810
ExternallyAssignedProductIdentifier4 : 0045325738009
ExternallyAssignedProductIdentifier5 : 00045325738009
FinishType : TiAlN
GpsrSafetyAttestation : 1
IncludedComponents : Vermont American 23120 1/2-Inch by 90-Degree Carbide
ItemDisplayDimensions_Length : 1 millimeters
ItemDisplayWeight : 0.1 pounds
ItemName : Vermont American 23120 1/2-Inch by 90-Degree Carbide Tipped V-Groove Router Bit, 2-Flute 1/4-Inch Shank
ItemPackageDimensions_Height : 3.048 centimeters
ItemPackageDimensions_Length : 7.366 centimeters
ItemPackageDimensions_Width : 3.81 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : edge-treatment-and-grooving-router-bits
Manufacturer : Vermont American
Material : Plastic
MeasurementSystem : Metric
ModelName : 23120
ModelNumber : 23120
NumberOfBoxes : 1
NumberOfCuttingEdges : 4
NumberOfFlutes : 4
NumberOfItems : 1
PackageLevel : unit
PartNumber : 23120
ProductDescription :

Solid Carbide Chamfer Roatry Drill Bit with 1/4 inch Shank Diameter, 2 inch Overall Length, 60&90 degree V-Groove Chamfer End;

4-Flute, Material: HRC55 Carbide with TiAlN Coating;

Unique V Design Maximizes the Tip Strength by Removing the Minimum Amount of Material From the end;

The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet;

Applicable for Steel, Cast Iron, Hard wood.

ProductSiteLaunchDate : 2004-09-14T00:01:00-00:00
Size : Pack of 1
Style : 3/8 Nose 30
SupplierDeclaredDgHzRegulation : unknown
ToleranceHeld : Precision
UnitCount : 1
UnspscCode : 27111701