Cart 2 india

Specification
Brand : BOSCH
BulletPoint1 : Razor sharp cutting edge diamond honed for smooth cuts
BulletPoint2 : Triple tempered shank for maximum durability
BulletPoint3 : Industrial micro grain Carbide for smooth cut
BulletPoint4 : Item type: Router Bit
BulletPoint5 : Cut type: Ogee Cut
BulletPoint6 : Material: Blend
BulletPoint7 : Number of flutes: 2
Color : No Color
CuttingAngleString : 90.0 degrees
CutType : Ogee Cut
ExternallyAssignedProductIdentifier1 : 045325738375
ExternallyAssignedProductIdentifier2 : 0045325738375
ExternallyAssignedProductIdentifier3 : 00045325738375
GpsrSafetyAttestation : 1
IncludedComponents : Router CNC
IncludedComponents1 : Power Tool Accessories
IncludedComponents2 : Router Bits & Accessories
IncludedComponents3 : Edge Treatment and Grooving Router Bit
ItemDisplayWeight : 0.2 pounds
ItemName : Vermont American 23158 23/32-Inch Radius Carbide Tipped Convex Edge Router Bit, 2-Flute 1/4-Inch Shank
ItemPackageDimensions_Height : 3.302 centimeters
ItemPackageDimensions_Length : 7.366 centimeters
ItemPackageDimensions_Width : 3.302 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : edge-treatment-and-grooving-router-bits
Manufacturer : Vermont American
Material : Plastic
Material1 : Blend
Material2 : Blend
Material3 : Blend
Material4 : Blend
Material5 : Blend
MeasurementSystem : Metric
ModelName : 23158
ModelNumber : 23158
NumberOfBoxes : 1
NumberOfFlutes : 2
NumberOfItems : 1
PackageLevel : unit
PartNumber : 23158
Pattern : Set
ProductDescription : These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock. This carbide tipped bit is specifically designed and manufactured for the high quality precision required by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. Always refer to the operation manual of your router first, in the event that a router bit doesn't come with a speed chart, you may start at about 2,000 rpm slower than the maximum speed described in the chart below. Maximum speed below is for reference only, actual best performance speed varies depending on a number of factors i.e. size of the router bit, the material to be cut, etc. Run 24,000 rpm maximum for 1" overall diameter router bits; Run 20,000 rpm maximum for 1-1/2" overall diameter router bits; Run 18,000 rpm maximum for 2" overall diameter; Run 16,000 rpm maximum for 2-1/2" overall diameter router bits;
ProductSiteLaunchDate : 2004-09-14T00:01:00-00:00
SafetyDataSheetUrl : https://ace.infotrac.net/getmsds.aspx?SKU=2185171
Size : Pack of 1
Style : 1/2-Inch Shank Ogee Profile Mini Rail and Stile Router Bit Set
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Wood
UnitCount : 1
UnspscCode : 27111701