Cart 2 india

Specification
Brand : Whiteside
BulletPoint1 : Whiteside Router Bits are made with Premium Carbide
BulletPoint2 : Precision ground for proper balance at high RPM
BulletPoint3 : Industrial Quality
BulletPoint4 : Translucent reservoir features viewing windows for assessing the bits inside, plus an O-ring gasket for a tight seal
BulletPoint5 : Two-sided diamond hone features 300 grit on one side and 600 on the other and can be rotated in handle so both halves of hone can be used
BulletPoint6 : Compact and Organized: Comes in a compact storage case, keeping the edge finders organized and protected. Easy to store and transport, minimizing workspace clutter.
CutType : Up-Cut
CutType1 : Rabbeting Cut
CutType2 : Carbide-Tipped Cut
ExternallyAssignedProductIdentifier : 8906183732597
ExternallyAssignedProductIdentifier1 : 844278019001
ExternallyAssignedProductIdentifier2 : 0844278019001
ExternallyAssignedProductIdentifier3 : 00844278019001
ExternallyAssignedProductIdentifier4 : 0797936214976
ExternallyAssignedProductIdentifier5 : 00738685953877
GpsrSafetyAttestation : 1
IncludedComponents : Includes three hex wrenches—5/64'', 3/32'' and 1/8''—for removing most bearings
ItemName : Whiteside Router Bits 1900 Standard Rabbeting Bit with 1-1/4-Inch Large Diameter, 3/8-Inch Cutting Diameter and 1/2-Inch Cutting Length
ItemPackageDimensions_Height : 5.08 centimeters
ItemPackageDimensions_Length : 13.97 centimeters
ItemPackageDimensions_Width : 7.62 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : edge-treatment-and-grooving-router-bits
Manufacturer : Whiteside
Material : Carbide
ModelNumber : 1900
NumberOfFlutes : 2
NumberOfItems : 1
PartNumber : 1900
ProductDescription : Considering how much wood as your router bits go through, it's not surprising that they get caked with residue after a while. Keep them running like new with our handy router bit cleaning kit. The kit consists of a cleaning reservoir with on-board storage for an included folding brass brush, a ''bit grip'' with collets for safely holding your bits while cleaning, and a dual-grit diamond hone for putting a fresh edge on the cutters. The lid features circular holders that are stepped to accept 1/4'', 8mm and 1/2'' shanks. Just plug your bits into the holders and once the lid is installed, it suspends your bits upside down in the cleaning solution without allowing the cutters to clank against each other.
ProductSiteLaunchDate : 2006-08-02T15:58:48-00:00
Size : 1/4 in
Style : SHAPE5
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111701