Cart 2 india

Specification
Brand : QeuSulio
BulletPoint1 : 【Good Material & Serrated Undercut Blade】 This guillotine bone cutting machine is made of stainless steel, which is hard and corrosion-resistant, allowing it to be used for a long time. You don't have to worry about it will deform easily. It uses a deepened serrated blade, which can stabilize the ingredients and make ingredients less likely to slide. It can also improve the efficiency of cutting bones for you.
BulletPoint2 : 【Enlarged Body & Easy Cutting】 The body is enlarged to allow you to place more ingredients at will for your convenience. This guillotine bone cutting machine uses an extended handle and a thickened blade (0.394in). The serrations on the undercut blade can play a non-slip role, allowing you to more easily cut bones.
BulletPoint3 : 【Application】It can be used for cutting pig feet, bar bones, beef ribs, lamb chops, pork ribs, chicken and duck, dried meat, herbs, etc.
BulletPoint4 : 【High Security】 It uses the extended support foot and solid all-steel handle, which has a higher level of safety. And it also adopts a relaxed bearing pivot structure, which can make the blade body not easy to loosen for a long time, preventing you from getting hurt while cutting.
BulletPoint5 : 【Convenient to Use & Easy to Clean】 It is equipped with a food spatula, which can directly help you to hold the ingredients so as not to dirty the table, which is convenient for you to use. Since it is made of smooth stainless steel, you just need to clean it with a soft cleaning cloth and rinse it off.
CareInstructions : Hand Wash Only
Color : Silver
ExternallyAssignedProductIdentifier1 : 0736963541570
ExternallyAssignedProductIdentifier2 : 736963541570
IncludedComponents : 1* Guillotine Bone Cutting Machine 1* Food Spatula 1* Chinese Instruction Manual
ItemName : Manual Frozen Meat Slicer, Manual Meat Bone Cutter Stainless Steel Hard Bone Cutter with Serrated Undercut Blade & Double Support Design for Cutting Pig Feet & Bar Bones and Beef Ribs
ItemPackageDimensions_Height : 6.42 inches
ItemPackageDimensions_Length : 30 inches
ItemPackageDimensions_Width : 11.81 inches
ItemTypeKeyword : electric-food-slicers
Manufacturer : ytweQCLMN
Material : Stainless Steel
ModelName : Guillotine Bone Cutting Machine
ModelNumber : ASHCD34
NumberOfItems : 1
OperationMode : Manual
ProductDescription :

Details

All-steel Handle: It uses an upgraded model solid all-steel handle so that it is not easy to loosen and break.

Lengthening Lever: It lengthens the blade arm lever. The longer the lever, the more effort it saves.

Support Feet: It uses extended one-piece support feet, which can effectively prevent the machine from turning over or buckling. 

Non-slip Handle Sleeve: The blade handle is equipped with a non-slip sleeve to prevent your hand from slipping due to the smooth stainless steel handle. 

Double Support Design: The bottom features a dual support design for greater stability during use and easy carrying and hanging when not in use.

Maintenance Method 

1.After each use, please clean with a soft cleaning cloth. After rinsing it, dry it, and store it in a cool and dry place.

2.When not in use for a long time, please smear all its parts with anti-rust oil. Then remove the ingredient fixing plate and store it in a dry place.

Sharpening Method

1.When the blade is not sharp, please remove the blade first if you need to sharpen it.

2.Blade edge angle: one side of the blade edge is a straight edge and another side is an inclined edge. The angle between the inclined edge and the straight one is about 35 °.

3.Soak the whetstone in water, with the blade facing downwards. Hold both ends of the blade with both hands and place the blade against the flat surface of the whetstone, ensuring that the blade is aligned with the working surface of the whetstone. Finally, push the blade back and forth and move it from side to side.

Specification

Material: Stainless Steel

Blade Tip Angle: 60°or More

Body Size: 38.6*20*6cm/ 14.96*7.87*2.36in

Blade Thickness: 1cm/ 0.394in

Handle Length: 35cm/ 13.78in

Blade Length: 36cm/ 14.17in

Food Spatula Size: 27*18*2cm/ 10.63*7.09*0.79in 

Support Foot Length: 59.5mm/ 23.43in

Net Weight: 8.2kg/ 18.08lbs

Gross Weight: 9kg/ 19.84lbs

 

Package Included

1* Guillotine Bone Cutting Machine

1* Food Spatula

1* Chinese Instruction Manual

ProductSiteLaunchDate : 2025-05-30T06:21:28.731Z
Size : 38.6*20*6cm/ 14.96*7.87*2.36in
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 52151600