Cart 2 india

Specification
AgeRangeDescription : boys
AssemblyTime : 15 minutes
BatteriesRequired : 1
Brand : FLIPSKY
BulletPoint1 : Durable:The aluminum alloy shell is waterproof and dustproof to a certain extent, which can hold the VESC circuit board more safely.
BulletPoint2 : Programmable：Based on VESC, programmable via vesc_tool with overheat and overcurrent protection.
BulletPoint3 : Rich Interfaces:Two COMM ports, UART bluetooth module, IMU,screen display or remote controller supportable.
BulletPoint4 : More powerful :Voltage:14-84V (4-20S) ，Max Current:120A,ERPM:150000 .Provide your electric skateboard with more powerful power and a more exciting modification experience
BulletPoint5 : Widely applications:e-skateboard,ebike,scooter,robot etc.Flipsky quality produce.
BulletPoint6 : Warm tips:It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
BulletPoint7 : Two COMM ports, UART bluetooth module, IMU,screen display or remote controller supportable.
BulletPoint8 : FS75100*1pcs;USB cable*1pcs;Hall sensor adapter (6pins)*1pcs;Manual*1pcs.
BulletPoint9 : Please turn off the phase filter function and choose "false" in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface.
CircuitType : 1-way
Color : black
ConnectivityProtocol : X-10
ConnectorType : 2 Pin
ControlMethod : touch
CountryAsLabeled : CN
CpsiaCautionaryStatement : no_warning_applicable
CurrentRating : 60 amps
Department : unisex-adult
EducationalObjective : Recreational
ExternallyAssignedProductIdentifier : 5052127035637
ExternallyAssignedProductIdentifier1 : 768111516505
ExternallyAssignedProductIdentifier2 : 0768111516505
ExternallyAssignedProductIdentifier3 : 0787551825299
ExternallyAssignedProductIdentifier4 : 0605482079195
ExternallyAssignedProductIdentifier5 : 00605482079195
GpsrSafetyAttestation : 1
Horsepower : 4 horsepower
ImportDesignation : Imported
IncludedComponents : 75100 FOC 75V 100A Single ESC Compatible with VESC® -Tool for Electric Skateboard/Scooter/Ebike Speed Controller
IncludedComponents1 : Crawler ESC Inside includes a BL32 USB link
IncludedComponents2 : pack box
IncludedComponents3 : (1) HOBBYWING decal
InternationalProtectionRating : IP54
IsAssemblyRequired : 1
ItemDisplayDimensions_Height : 33.8 micrometer
ItemDisplayDimensions_Length : 108 micrometer
ItemDisplayDimensions_Width : 50.8 millimeters
ItemName : FLIPSKY 75100 FOC 75V 100A Single ESC with Aluminum PCB Based on VESC for Electric Skateboard/Scooter/Ebike Speed Controller
ItemPackageDimensions_Height : 24.892 centimeters
ItemPackageDimensions_Length : 4.0894 centimeters
ItemPackageDimensions_Width : 13.3096 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hobby-rc-vehicle-speed-controls
Language : english
Manufacturer : flipsky
ManufacturerMaximumAge : 1188
ManufacturerMinimumAge : 1
Material : Aluminum
Material1 : Plastic
Material2 : Rubber
ModelName : FLIPSKY 75100 FOC 75V 100A Single ESC with Aluminum PCB Based on VESC for Electric Skateboard/Scooter/Ebike Speed Controller
ModelNumber : 75100
MountingType : Surface Mount or Handlebar Mount
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfLithiumIonCells : 1
OperatingVoltage : 12 volts
OperationMode : ON-OFF
PackageLevel : unit
PartNumber : 75100
PowerSourceType : Electric
ProductDescription :

Warm tips:It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.

Remark:Please be careful to limit the Absolute Maximum Current below 200A.

Specs:

• Voltage:14-84V (4-20S)
• Continuous Current:100A
• Max Current:120A
• Firmware: latest (firmware update supported)
• ERPM:150000
• Control Interface Ports:USB,CAN,UART
• BEC:5V@1A
• Phase filter: No
• Modes:DC, BLDC, FOC (sinusoidal)
• Supported Sensors:ABI,HALL,AS5047,AS5048A
• Input Set Support:PPM,ADC,NRF,UART
• Wire Size: 12AWG
• Size:L85mm*W50.7mm*H33.8mm
• Programmable: Yes
• Regenerative Capacity: Yes

Feature:

Two COMM ports, UART bluetooth module, IMU,screen display or remote controller supportable.

Based on VESC, programmable via vesc_tool with overheat and overcurrent protection. 

Warm tips:

Phase filering is not available for Flipsky ESC75100 and 75200!

Please turn off the phase filter function and choose "false" in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface.

Package included:

FS75100*1pcs

USB cable*1pcs

Hall sensor adapter (6pins)*1pcs

Manual*1pcs

ProductSiteLaunchDate : 2021-10-11T07:41:32.995Z
SafetyWarning : We strongly suggest using 5,000 mAh or larger LiPo cells with a discharge rating of at least 30C. Do not attempt to use NiMH cells in extreme setups.
ScaleName : 1:10 Scale
Size : L85mm*W50.7mm*H33.8mm
StreetDate : 2018-01-25T00:00:01Z
Style : Electric Skateboard/Scooter/Ebike Speed Controller/Vesc
SubBrand : (-)
SubjectCharacter : (-)
SupplierDeclaredDgHzRegulation : unknown
SwitchType : MOSFET
TargetAudienceKeyword : boys
TargetAudienceKeyword1 : Men
TargetAudienceKeyword2 : Unisex Adults
TargetAudienceKeyword3 : Boys
TargetGender : male
TerminalType : Quick-connect
Theme : Vehicles, Speed
ToyVehicleForm : Car
UnitCount : 1
UnspscCode : 26111500
Voltage : 12 volts
WarrantyDescription : 2m