Cart 2 india

Specification
AgeRangeDescription : Kid
Brand : 通用
BulletPoint : RC Car Program Card LED Program Box 2C 86020010 Programm Card For XERUN and EZRUN Series Car Brushless ESC
BulletPoint1 : Widely use for RC boat, RC tug boat, RC fishing bait boat, RC cruise, RC marine, RC car, RC hydroplane, toy boat spare parts etc.
BulletPoint2 : Suitable for 540, 550, 775, 795, 895, 997 brush motor.
BulletPoint3 : Automatically to find the neutral point, No throttle rang calibration required.
BulletPoint4 : Build in 5V/3A UBEC,It can drive 2PCS 25kg sovers.
BulletPoint5 : Multiple protection features: Low voltage cut-off protection for lithium battery, Over-heat protection, Throttle signal loss protection, motor blocked protection.
Color : 2 Pieces
CpsiaCautionaryStatement : no_warning_applicable
ExternallyAssignedProductIdentifier : 7733477139753
ExternallyAssignedProductIdentifier1 : 9976501871702
ExternallyAssignedProductIdentifier2 : 7545069177681
Horsepower : 1000 watts
IndoorOutdoorUsage : outdoor
IsAssemblyRequired : 1
ItemName : RC Boat ESC 3-6S 100A Water Cooling 2-Ways Speed Controller for 775 Brush Motor RC Tug Bait Fishing Boat Cruise Marine
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hobby-rc-vehicle-speed-controls
Manufacturer : KEEYOODOK
ManufacturerMinimumAge : 36
Material : Plastic
NumberOfItems : 1
OperationMode : Automatic
PartNumber : KYD202242116-USA
PowerSourceType : battery powered
ProductDescription : Widely use for RC boat, RC tug boat, RC fishing bait boat, RC cruise, RC marine, RC car, RC hydroplane, toy boat spare parts etc.
Suitable for 540, 550, 775, 795, 895, 997 brush motor.
Automatically to find the neutral point, No throttle rang calibration required.
Working modes: Forward/ Backward and no brake mode.
Build in 5V/3A UBEC,It can drive 2PCS 25kg sovers.

Please note:
UBEC is a switching-Mode regulators, Please don`t use two ESC in parallel to power the receiver, otherwise they will be burned.the correct method is to disconnect the positive line of one ESC.

LED Indicate:
LED on-- Working normally
LED flash-- The throttle stick is not at the neutral point
LED flash fast-- Signal lost

How to use:
1, Connect with receiver,motor,battery correctly.
2, Turn on the power of ECS, If the transmitter is off, LED will flash fast.
3, Push the throttle stick to the neutral point,Turn on the transmitter, and adjust the throttle trim until the LED on.that means the neutral position has been confirmed.

-- Specification & Features --

- Working Voltage: 10V-26V ( LiPo 3S-6S )
- Remote control signal PWM: 800us-2200us
- Neutral Point: 1500us
- Input plug: XT60 plug
- Out plug: 4mm banana connector
- Build in 24PCS MOS FET
- "H" bridge structure
- Continuous/Peak Current: forward 100A/640A, Backward 100A/640A
- Rated Power: 1000W
- Motor Limit:
Drive ability at the same time at 12V: 6PCS 540, 6PCS 550,4PCS 775,4PCS 795,4PCS 895 or 2PCS 997 Motors
Drive ability at the same time at 24V: 4PCS 775,4PCS 795,2PCS 895 or 2PCS 997 Motors

-- Item Contains --

1 piece of 100A ESC Brush Motor Speed Controller( Easy to use, no manual )

ProductSiteLaunchDate : 2022-04-21T08:48:21.475Z
Size : Small
Speed : 60000 rpm
Style : 2300KV
TargetAudienceKeyword : Men Women Children
TargetGender : unisex
Theme : Aviation, Electronic
UnitCount : 1
UnspscCode : 26111500
Voltage : 26 volts
Voltage1 : 5.8 volts
Voltage2 : 8.4 volts