Cart 2 india

Specification
Brand : Sound Troubleshooting
BulletPoint1 : EASY TO USE - The tester will automatically detect the pin position, the release time of the action, and the consistency of the relay in each test phase. If the tester lights up the green LED light, the relay is normal; if the red LED light is on, the relay is abnormal. The relay puller makes it easy to remove the relays to be tested.
BulletPoint2 : FAST OPERATION - First, clip the alligator clip of the tester to the car battery, the black clip on the negative pole, and the red clip on the positive pole. When the red LED light is on, the tester is ready to start the test. Move the 4 Pin/5 Pin switch to match the number of pins on the relay. Select the appropriate socket according to the relay pins and configuration and insert the relay into the socket. Press the "Test" button, and the tester will automatically begin to operate the relay several times while checking all operations of the relay.
BulletPoint3 : VERSATILE FITMENT - Suitable for most general-purpose automotive relays on the market. When testing, it needs to be connected to the car's 11V-15V battery. The car battery must be a 12V battery, and the battery voltage must be between 11V-15V; 2. The applicable coil resistance is preferably above 20 ohms. *Not intended for use with all BMW relays*
BulletPoint4 : COMPACT DESIGN - Our automotive Relay tester is small and easy to carry around for on-the-go jobs or for easy storage. Its compact design allows easy use no matter where you are.
BulletPoint5 : SIMPLE AND EFFECTIVE - With our patented design this relay tester will give you the results you need quickly and easily. A red light means that the relay is bad, and a green light means the relay is good!
CircuitType : Parallel
Color : Black, Red
ConnectivityProtocol : X-10
ConnectorType : Standard Automotive Electrical Connector
ControllerType : Electrical Circuit
ControlMethod : touch
ExternallyAssignedProductIdentifier1 : 0198715718959
ExternallyAssignedProductIdentifier2 : 198715718959
FitType : Vehicle Specific
IncludedComponents : Relay Tester, Relay Puller
InternationalProtectionRating : IP00
ItemName : Sound Troubleshooting Automotive Relay Tester with Relay Puller - 12V Auto Relay Diagnostic Tool, Small Handheld DIY Car Relay Tester with Battery Clips, Relay Testing Kit, Electrical Systems Tool
ItemPackageDimensions_Height : 24.4094 centimeters
ItemPackageDimensions_Length : 4.191 centimeters
ItemPackageDimensions_Width : 14.5034 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-electrical-system-tools
Manufacturer : JET Tools Co., Ltd
Material : Alloy Steel
Material1 : Alloy Steel
Material2 : Chromium-Vanadium Steel
MeasurementAccuracy : 0.1 - 0.5%
MeasurementType : Ohmmeter
MinimumOperatingVoltage : 11 volts_of_direct_current
ModelName : Electrical Disconnect Pliers
ModelNumber : STRT02
MountingType : Panel Mount
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPositions : 2
OperationMode : Electrical
PartNumber : STRT001
PowerSourceType : Battery Powered
ProductDescription : Introducing the Sound Troubleshooting Handheld 12v Relay Tester, aiding you with quickly and easily checking the relays of most modern vehicles (NOT INTENDED FOR USE WITH ALL BMW RELAYS). This compact design allows you to carry around the relay tester for on-the-go jobs and can be easily stored. Use the Sound Troubleshooting Handheld Relay Tester no matter where you are!
ProductSiteLaunchDate : 2024-03-04T17:19:00.667Z
SpecificationMet : Genuine Gm Part
SpecificUsesForProduct : Removing and separating electrical connectors in automotive applications
SpecificUsesForProduct1 : Automotive Repair
SpecificUsesForProduct2 : General Mechanical Work
SpecificUsesForProduct3 : Plumbing Repairs
SpecificUsesForProduct4 : Workshop Tasks
Style : compact
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SwitchType : Standard Electrical Switch
TerminalType : Physical
UnitCount : 2
UnspscCode : 41113600
WarrantyDescription : 6 Month