Cart 2 india

Specification
Brand : 3M
BulletPoint1 : Excellent resistance to most chemicals used in typical electroplating and anodizing operations
BulletPoint2 : Resists most common solvents and works at temperatures up to 170°F/76°C
BulletPoint3 : Abrasion, moisture and wear resistant to withstand rugged working conditions
BulletPoint4 : Conformable backing is ideal for use on curved and irregular surfaces
BulletPoint5 : Rubber adhesive provides excellent holding strength on many surfaces
BulletPoint6 : For industrial/occupational use only. Not for consumer sale or use
Color : Tan
CompatibleMaterial : Rubber
CompatibleMaterial1 : Polyvinyl Chloride
CompatibleMaterial2 : Vinyl
ExternallyAssignedProductIdentifier : 50021200876764
ExternallyAssignedProductIdentifier1 : 0635414682230
ExternallyAssignedProductIdentifier2 : 635414682230
ExternallyAssignedProductIdentifier3 : 00843484107175
IncludedComponents : Industrial Adhesives and Tapes^Vinyl Tapes
ItemDisplayDimensions_Height : 0.5 inches
ItemDisplayDimensions_Length : 1.75 inches
ItemDisplayDimensions_Width : 1.75 inches
ItemDisplayWeight : 0.05 pounds
ItemName : 3M Electroplating Tape 470, Tan, 3 in x 36 yd, 7.1 mil, 12 Rolls per case
ItemPackageDimensions_Height : 10 inches
ItemPackageDimensions_Length : 10.8 inches
ItemPackageDimensions_Width : 10.8 inches
ItemPackageQuantity : 1
ItemTypeKeyword : electrical-tape
Manufacturer : 3M
Material : Vinyl
ModelNumber : 87676-case
NumberOfItems : 12
PartNumber : 87676-case
ProductDescription : Polyimide Film Tape (70001) is a 1 mil amber commercial grade electrical Kapton alternative polyimide film coated with a high performance silicone adhesive. Tape is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures. Adhesive will thermoset to increase adhesion values. Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits operation of boards during processing. Film meets UL510. Formulated to Mil Spec: MIL-P-46112b. 3" Core. Applications: * Masking applications where very high temperatures are involved. * Designed for insulating coil at high temperature as well as for the products like generator, capacitor and transformer to use. Physical Properties: Backing 1.0 mil polyimide film (amber) Adhesive Silicone Total Thickness 2.6 mil Adhesion 23 oz/inch Elongation >40% Temperature Resistance 200°C (392 í_F) / 30min. Dielectric Strength 6500 Volts Alternative to: Bondtec #911-325; Electro Tape #95-2; Anchor #K-350; American #304-2; Permacel #P-222; T&F #3903; Taconic #6325-02; Berry Plastics #2345-2; Tesa #4429; Ideal #9322; Solar Plus #KA105#50; Dewal #303-2. Note: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.
ProductSiteLaunchDate : 2018-03-30T08:00:01.000Z
RecommendedUsesForProduct : electrical-installation-and-maintenance
Size : 1/2 in. x 20 ft.
StreetDate : 2018-03-30T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Metal, Rubber
UnitCount : 12
UnspscCode : 31201500
UpperTemperatureRating : 250 degrees_fahrenheit
WaterResistanceLevel : water_resistant