Cart 2 india

Specification
Brand : Alanson Products
BulletPoint1 : Polyimide Tape 1 Mil - Kapton Alternative
BulletPoint2 : 7/8" (22.2mm)[Single Roll]
BulletPoint3 : UL Listed, VDE, CSA Certified and RoHS compliant.
BulletPoint4 : Flame retardant and is highly resistant to UV rays and varying weather conditions.
BulletPoint5 : The combination of the pressure-sensitive, rubber-resin adhesive and the PVC backing offers excellent electrical and mechanical protection.
Color : Amber
CompatibleMaterial : Metal
CompatibleMaterial1 : Polyvinyl Chloride
CompatibleMaterial2 : Vinyl
ExternallyAssignedProductIdentifier1 : 0635414682230
ExternallyAssignedProductIdentifier2 : 635414682230
ExternallyAssignedProductIdentifier3 : 00843484107175
ItemDisplayDimensions_Height : 0.5 inches
ItemDisplayDimensions_Length : 1.75 inches
ItemDisplayDimensions_Width : 1.75 inches
ItemDisplayWeight : 0.05 pounds
ItemName : Polyimide Tape 1 Mil - Kapton Alternative (70000) (Single Roll, 7/8" (22.2mm))
ItemPackageDimensions_Height : 0.5 inches
ItemPackageDimensions_Length : 1.75 inches
ItemPackageDimensions_Width : 1.75 inches
ItemPackageQuantity : 1
ItemTypeKeyword : electrical-tape
Manufacturer : Alanson Products
Material : Silicone,Silicone Adhesive
ModelNumber : 35-1/2X20FT-BL
NumberOfItems : 1
PartNumber : 70000-0088-001-36
ProductDescription : Polyimide Film Tape (70001) is a 1 mil amber commercial grade electrical Kapton alternative polyimide film coated with a high performance silicone adhesive. Tape is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures. Adhesive will thermoset to increase adhesion values. Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits operation of boards during processing. Film meets UL510. Formulated to Mil Spec: MIL-P-46112b. 3" Core. Applications: * Masking applications where very high temperatures are involved. * Designed for insulating coil at high temperature as well as for the products like generator, capacitor and transformer to use. Physical Properties: Backing 1.0 mil polyimide film (amber) Adhesive Silicone Total Thickness 2.6 mil Adhesion 23 oz/inch Elongation >40% Temperature Resistance 200°C (392 í_F) / 30min. Dielectric Strength 6500 Volts Alternative to: Bondtec #911-325; Electro Tape #95-2; Anchor #K-350; American #304-2; Permacel #P-222; T&F #3903; Taconic #6325-02; Berry Plastics #2345-2; Tesa #4429; Ideal #9322; Solar Plus #KA105#50; Dewal #303-2. Note: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.
ProductSiteLaunchDate : 2017-02-06T23:02:29.637Z
RecommendedUsesForProduct : electrical-installation-and-maintenance
Size : 1/2 in. x 20 ft.
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31201500
WaterResistanceLevel : water_resistant