Cart 2 india

Specification
Brand : Graphtek
BulletPoint1 : Good adhesion: 1/4 inch copper foil tape suitable for stained glass, strong adhesion. Tape is easy to peel off, bend freely and stick to uneven surfaces. Ideal for stained glass manufacturers. Specification: Standard 1/4 inch wide, 36 gauge copper.
BulletPoint2 : Suitable for education and crafts:1/4 copper foil tape is the ideal size for making paper circuits and is a practical and fun way for kids to explore electronics. Malleable tapes with adhesives can be bonded to most surfaces, offering unlimited potential for craft projects.
BulletPoint3 : Conductive aluminum foil tape: copper foil tape with electrical conductivity, widely used in electronic manufacturing, circuit maintenance, paper circuit, colored glass, arts and crafts and other fields.
BulletPoint4 : Easy peeling: The copper tape is easy to peel and no residue, making your work more efficient and cleaner.
BulletPoint5 : Kind reminder: Safety is more important than anything else, so I hope that no matter what occasion you use it in, please be careful!!!
Color : coppery
CompatibleMaterial : Glass
CompatibleMaterial1 : Aluminum
CompatibleMaterial2 : Glass
CompatibleMaterial3 : Plastic
ItemForm : Paste
ItemName : Aremco-Bond 860 Thermally Conductive Epoxy, Pint
ItemPackageDimensions_Height : 6 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 0.31 inches
ItemPackageQuantity : 1
ItemShape : Roundness
ItemTypeKeyword : conductive-adhesives
ItemVolume : 16 fluid_ounces
Manufacturer : Graphtek
Material : Resin
ModelNumber : ARMC-860
NumberOfItems : 1
PartNumber : 860
ProductDescription : Aremco-Bond 860 is a two-component, 100% solids, high temperature, aluminum nitride filled, thermally conductive, electrically insulating epoxy system used for electrical and electronic bonding applications to 400°F (204°C). Exhibits excellent adhesion to a variety of high temperature plastics such as polyimides and composites, as well as ceramics, glass, and high expansion metals.

Aremco-Bond 860 is mixed in a ratio of 1 part base resin to 1 part activator by weight. Requires curing for 2 hours at 200°F (recommended) or for 24-48 hours at room temperature. In most cases, the epoxy should be applied to both surfaces maintaining a glue line of less than 10 mils.

This system demonstrates very good corrosion protection and thermal shock resistance. Typical applications for Aremco-Bond 860 include the bonding of heat sinks and fins used in heat exchangers and electrical/electronic assemblies.

ProductSiteLaunchDate : 2013-10-31T19:58:41.786Z
RecommendedUsesForProduct : Electrical, Arts and Craft
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation1 : Metal
SurfaceRecommendation2 : Glass
UnitCount : 2
UnspscCode : 31201600
WaterResistanceLevel : water_resistant