Cart 2 india

Specification
Brand : Epoxy International
BulletPoint1 : Appearance: Black
BulletPoint2 : Cure Type: Heat cure or Room temperature
BulletPoint3 : Benefits: Continuity of conductivity High adhesion Wide operating temperature range
BulletPoint4 : Mix Ratio by weight: 100:10 / Resin:Hardener
BulletPoint5 : Substrates: Aluminum, copper, magnesium, steel, bronze, nickel, ceramic, glass, phenolic, G-10 epoxy glass boards
Color : Bronze,Black
CompatibleMaterial1 : Aluminum
CompatibleMaterial2 : Ceramic
CompatibleMaterial3 : Glass
CompatibleMaterial4 : Alloy Steel
ItemForm : Liquid
ItemName : Carbon-Bond 61 Electrically Conductive, Carbon Filled, Room Temperature Cure Epoxy Adhesive
ItemPackageQuantity : 1
ItemTypeKeyword : conductive-adhesives
Manufacturer : Epoxy International
Material : Aluminum
Material1 : epoxy
Material2 : epoxy
Material3 : epoxy
Material4 : epoxy
Material5 : epoxy
NumberOfItems : 1
PartNumber : Carbon-Bond 61-100
ProductDescription : Mix Ratio by weight: 100:10 / Resin:Hardener Substrates: Aluminum, copper, magnesium, steel, bronze, nickel, ceramic, glass, phenolic, G-10 epoxy glass boards Operating Temperature: -50 to 170 C Typical Applications: Electronic bonding and sealing applications that require both fine electrical and mechanical properties. Shelf Life: 6 Months Compressive Strength, psi: 13,000 Specific Gravity, mixed: 1.35 g/cc Pot Life: 30 minutes 15 minutes: @ 100C 1 hour: @ 60C 24 hours: @ 25C Volume Resistivity: ohm cm: < 40 Tensile Strength, psi: 8,500 Shrinkage Linear: 0.003 in/in Hardness, Shore D: 85 Carbon-Bond 61 Electrically Conductive, Carbon Filled, Room Temperature Cure Epoxy Adhesive is an epoxy adhesive and coating formulation based on conductive carbon.Carbon-Bond 61 Electrically Conductive, Carbon Filled, Room Temperature Cure Epoxy Adhesive is recommended for electronic bonding and sealing applications that require both fine electrical and mechanical properties.Carbon-Bond 61 Electrically Conductive, Carbon Filled, Room Temperature Cure Epoxy Adhesive cures at room temperature or can be accelerated with mild heat to form a tenacious bond between similar and dissimilar substrates.For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).1) Carefully clean and dry all surfaces to be bonded.2) Apply Carbon-Bond 61 Electrically Conductive, Carbon Filled, Room Temperature Cure Epoxy Adhesive completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.4) Some ingredients in this formulation provided may crystallize when subjected to low temperature
ProductSiteLaunchDate : 2016-03-28T14:21:43.587Z
UnspscCode : 31201600
WaterResistanceLevel : waterproof