Cart 2 india

Specification
Brand : Epoxy International
BulletPoint1 : Appearance: Slight haze/ slight straw
BulletPoint2 : Cure Type: Room temperature or Heat cure
BulletPoint3 : Benefits: Resistant to many organic/inorganics Strong bond strength Great electrical insulator Durable
BulletPoint4 : Mix Ratio by weight: 100:100 / Resin:Hardener
BulletPoint5 : Substrates: metals, plastics, concrete, sheetrock, tile, marble, stone, rock, plaster,cement,glass fabrics, Leather, leather and rigid plastics
Color : Light Tan
CompatibleMaterial : Ceramic,glass,packaging,plastics
CompatibleMaterial1 : Glass
CompatibleMaterial2 : Stone
CompatibleMaterial3 : Leather
CompatibleMaterial4 : Plastic
ItemForm : Straw
ItemName : Fabric-Bond 1 Super Strong Bonding Agent 2 Hour Quick Drying
ItemPackageQuantity : 1
ItemTypeKeyword : conductive-adhesives
Manufacturer : Epoxy International
Material : Resin
ModelNumber : 6b2d2e0e-ec16-44e7-98df-cb3933a8e7db
NumberOfItems : 1
PartNumber : Fabric-Bond 1-250
ProductDescription : Mix Ratio by weight: 100:100 / Resin:Hardener Substrates: metals, plastics, concrete, sheetrock, tile, marble, stone, rock, plaster,cement,glass fabrics, Leather, leather and rigid plastics Operating Temperature: -60 to 110 C Typical Application(s): Anything requiring the unique properties this adhesive offers Pot Life: 5 minutes Viscosity @ 25 C, mPas (cP): Thixotropic Solids Content: 100% Specific Gravity, mixed: 1.2 g/cc 30 minutes: @ 65C 2 hours: @ 25C Volume Resistivity: 5.00e+11 ohm-cm Dielectric Constant: 4.8 Dielectric Strength: 410kV/in CTE, linear: 33.3 in/in-F@ RT Hardness, Shore D: 70 Glass Transition Temp, Tg: 25.0 C, 77.0 F Fabric-Bond 1 is an exceptional epoxy formulation recommended for lower temperature or wet industrial bonding applications where FAST CURING is required.Leather-Bond 1 is versatile two-part epoxy system contains no solvents, mixes easily at room temperature, and is suitable for high performance structural bonding applications where the combination of very fast room temperature curing coupled with low shrinkage and excellent mechanical and electrical properties is needed.Leather-Bond 1 develops strong, tough bonds to metals, plastics, concrete, sheetrock, marbel, stone, rock, tile, plaster, cement, glass and glass fabrics, hardboards and forestry products, Leathers, rubber, masonry materials, and other construction materials.Leather-Bond 1 is an excellent electrical insulator, and provides superior resistance to vapors and gases, water, galvanic action, petroleum fuels, salt solutions, and many other organic and inorganic compounds.Leather-Bond 1 develops significant properties 1 hour after mixing. However, an extended cure of 4-6 hours at 25C is required for fully matured bonds.For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).1) Carefully clean and dry
ProductSiteLaunchDate : 2016-03-28T14:22:47.902Z
SpecificUsesForProduct1 : Food Processing
SpecificUsesForProduct2 : Biomedical Devices
SpecificUsesForProduct3 : Equipment Manufacturing
TensileStrength : 2100 pounds_per_square_inch
UnspscCode : 31201600
Viscosity : 27000 cps
WaterResistanceLevel : water_resistant