Cart 2 india

Specification
Brand : Epoxy International
BulletPoint1 : Appearance: Clear
BulletPoint2 : Cure Type: Heat cure or Room temperature
BulletPoint3 : Benefits: Low viscosity Good resistance Effective electrical insulator Low permeability
BulletPoint4 : Mix Ratio by weight: 100:20 / Resin:Hardener
BulletPoint5 : Substrates: Most metals, ceramic, glass and plastics
Color : Clear
CompatibleMaterial : Wood,glass,packaging,plastics
CompatibleMaterial1 : Ceramic
CompatibleMaterial2 : Glass
CompatibleMaterial3 : Plastic
CompatibleMaterial4 : Wood
ItemForm : Paste
ItemName : FDA-Bond 15 Food & Drug Administration Medical Grade Epoxy Adhesive for Bonding and Coating
ItemPackageQuantity : 1
ItemTypeKeyword : conductive-adhesives
ItemVolume : 24 fluid_ounces
Manufacturer : Epoxy International
Material : Wood
Material1 : Epoxy Resin
Material2 : Resin
NumberOfItems : 1
PartNumber : FDA-Bond 15-100
ProductDescription : Mix Ratio by weight: 100:20 / Resin:Hardener Substrates: Most metals, ceramic, glass and plastics Operating Temperature: -70 to 140 C Typical Application: Developed for bonding and coating applications Viscosity @ 25 C: 4,300 Thixotropic Index: 1.0 Specific Gravity, mixed: 1.16 g/cc Reactive solids contents, %: 100 Pot Life: 25 minutes 1-4 hours: @ 65C 24 hours: @ 25C Glass transition temperature (Tg), C: 100 Hardness, Shore D: 87 Water Absorption, %: 0.23 Dielectric strength, Volts/mil: 420 Lap shear strength, psi: 2000 (Alum to Alum) Volume Resistivity: 2.00e+14 ohm-cm Dielectric Constant: 4.3 @ Frequency 1000 Hz FDA-Bond 15 Food & Drug Administration Medical Grade Epoxy Adhesive for Bonding and Coating is a low viscosity epoxy resin system specifically developed for bonding and coating applications in accordance with Title 21, U.S. Code of Federal Regulations, Food and Drug Administration Chapter 1, Sub Part B, Sections 175.105 and 175.300.FDA-Bond 15 Food & Drug Administration Medical Grade Epoxy Adhesive for Bonding and Coating is two-part adhesive is used for bonding, laminating and repair applications by manufacturers of food preparation, processing and packaging equipment, and by manufacturers of catheters, hearing aids, dental products and other biomedical instruments and devices.FDA-Bond 15 Food & Drug Administration Medical Grade Epoxy Adhesive for Bonding and Coating is an effective electrical insulator, and it provides low permeability to gases and vapors and good resistance to water, weather, galvanic action, to petroleum solvents, lubricants and fuels, to mild acids and alkalis, and to many other organic and inorganic compounds.For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).1) Carefully clean and dry all surfaces to be bonded.2) Apply FDA-Bond 15 Food & Drug Administration Medical Grade Epoxy Adhesive for Bonding and Coating completely mixed adhesive to the pr
ProductSiteLaunchDate : 2016-03-28T14:22:33.093Z
UnitCount : 1
UnspscCode : 31201600
WaterResistanceLevel : water_resistant