Cart 2 india

Specification
Brand : Epoxy International
BulletPoint1 : Appearance: Light Tan
BulletPoint2 : Cure Type: Heat cure or Room temperature
BulletPoint3 : Benefits: High viscosity Easily mixed Electrical insulator Low permeability Good resistance
BulletPoint4 : Mix Ratio by weight: 100:40 / Resin:Hardener
BulletPoint5 : Substrates: Most metals, ceramic, glass and plastics
Color : Light Tan
CompatibleMaterial : Ceramic,glass,packaging,plastics
CompatibleMaterial1 : Glass
CompatibleMaterial2 : Plastic
ItemForm : Paste
ItemName : FDA-Bond 22 Medical Grade Epoxy Adhesive, Low Permeability to Gases and Vapors
ItemPackageQuantity : 1
ItemTypeKeyword : conductive-adhesives
Manufacturer : Epoxy International
Material : Ceramic,Glass
ModelNumber : 6b2d2e0e-ec16-44e7-98df-cb3933a8e7db
NumberOfItems : 1
PartNumber : FDA-Bond 22-100
ProductDescription : Mix Ratio by weight: 100:40 / Resin:Hardener Substrates: Most metals, ceramic, glass and plastics Operating Temperatures: -70 to 145 C Typical Applications: Bonding, laminating and repair applications by manufacturers of food preparation, processing and packaging equipment, and by manufacturers of catheters, hearing aids, dental products and other biomedical instruments and devices. Viscosity @ 25 C, cps: 27,000 Thixotropic Index: 1.2 Specific Gravity, mixed: 1.44 Hardness, Shore D: 78 CTE, Linear: 26.1 in/in-F Dielectric strength kv/in: 420 Volume Resistivity ohm-cm: 1.50e+14 ohm-cm Elongation at Yield: 5.0 % Adhesive Bond Strength: 2100 psi Lap shear, alum to alum Dielectric Constant: 3.5 @ frequency 1000 Hz Dielectric Strength: 420 kV/in Dissipation Factor: 0.020 @ frequency 1000 Hz 1-4 Hours: @ 65C 24 to 36 Hours: @ 25C FDA-Bond 22 Medical Grade Epoxy Adhesive, Low Permeability to Gases and Vapors is a high viscosity epoxy resin system specifically developed for bonding and coating applications in accordance with Title 21, U.S. Code of Federal Regulations, Food and Drug Administration (FDA) Chapter 1, Sub Part B, Sections 175.105 and 175.300.FDA-Bond 22 Medical Grade Epoxy Adhesive, Low Permeability to Gases and Vapors is two-parts tan adhesive is easily mixed, used and cured at room temperature for bonding, laminating and repair applications by manufacturers of food preparation, processing and packaging equipment, and by manufacturers of catheters, hearing aids, dental products and other biomedical instruments and devices.FDA-Bond 22 Medical Grade Epoxy Adhesive, Low Permeability to Gases and Vapors is an effective electrical insulator, and it provides low permeability to gases and vapors, and good resistance to water, weather, galvanic action, to petroleum solvents, lubricants and fuels, to mild acids and alkalis, and to many other organic and ino
ProductSiteLaunchDate : 2016-03-28T14:22:46.931Z
SpecificUsesForProduct1 : Food Processing
SpecificUsesForProduct2 : Biomedical Devices
SpecificUsesForProduct3 : Equipment Manufacturing
TensileStrength : 2100 pounds_per_square_inch
UnspscCode : 31201600
Viscosity : 27000 cps
WaterResistanceLevel : water_resistant